434064434066434068434070
Type: Posts; User: krugshouse
434064434066434068434070
i think this what you are looking for.
Thanks Gerry
the feed rate of 6 shows up at the bottom of the screen. Not sure where it comes from because i have never set anything to a feed rate of 6. my motor tune in Mach3 is set to 250 ipm. And my slowest...
I get this as well. This also makes my amchine run slow.
OOOOOOH RAAAAHHHHH
Gerry
i have used your screenset for about two years now on a small DIY machine and i love it. i just finished building a Blackfoot DIY 48" x 96" machine. my first question is do i have to...
A few days ago i saw where someone was looking for a dxf file of the SOA. Here is what I made. I made it to be cut in wood but I figure it will work in metal too. Post a few pics of it.
try this
the dialog window i get when i run the program only allows me to import the g code file. there is nothing that would allow me to set any restriction on heights.
i tried using this program and got mostly unusable garbae on the convert. is there anything else i can use?
I ran this file thru Vcarve and it came out very nice. thanks for the file.
might help if i attached the file. dxf format
qsacracer hope this works out for you.
here is the vcarve pro files
hey i found a way to zip the files so here you are. please post a picture of the finished product.
no problem. only thing is i can't zip the files, cant upload them here. email me krugshouse@hotmail and i will send them to you.
i did this in Vcarve Pro. i have the g code for it. size is 15" x 15"
thanks for the Eagle it looks like fun to build
I just want to thank every one who posted files.