Jim, How did you open the file in Fusion please?
Sorry, worked it out.
Type: Posts; User: mikejohn37
Jim, How did you open the file in Fusion please?
Sorry, worked it out.
Thanks so much.
I have found out the files were most likely created in an academic version of Solid Edge which cannot be opened in the regular version.
Ok I have worked out they are Solid Edge files. Can someone with Solid Edge see if they can open it please? I tried but was not successful.
Can anyone view these files please? I don't understand what the extensions are? I would like to build it.
https://www.thingiverse.com/thing:42659/files
Can anyone see a place to connect a probe to on this breakout board please? By probe I mean a touch plate for the Z Axis.
Mike
- - - Updated - - -
Thanks John. No need for the Mach3 screen shots. This should do the job - thank you.
Would you be able to take some screen shots of the spindle setup in Mach3 please John?
Thank you. I did not realise they varied. I don't know much about electronics so please keep it simple :-).
Here are some pics.
Questions:
First, at the moment I am using the turn knob on...
Does anyone have this control box on their Chinese 6040 Router? I have some questions.
Could someone please explain how to use this z axis setter? And, it has two set screws underneath but what do they do?
Mike
Could you please tell me what the file type of this file is attached and how to make it a stl or like?
Would this vbit be okay on the rowmark engraving laminate?
Rowmark - Mattes Product Line
1/4 X 60 V-CARVE BIT 3" LENGTH
...
Do you know what they are rated generally? I could not find that info.
Mike
What is the safe air temperature range for operating a cnc router (mine is a chinese 6040)? And what is the safe temperature range for storing the machine when it is off? Min and Max please?
I...
Yes Gerry that is what I thought. And, yes a lot of trial and error. Wish he was contactable but I can't find him - his site is down. I will give it a go. If it works, I will post a picture.
How did he do this? Halftone software set to lines?
https://www.youtube.com/watch?v=orkZnsLbKeQ
I was looking for a "mechanical" rather than electronic means of setting the Z axis height using something other than a piece of paper under the bit etc. V-bit tends to punch through paper.
I came...
Is this dreadful noise from the control box normal?
I just recorded the noise. Zipped Sound file attached.
Mike
Could someone please explain how to operate this cnc controller? I want to operate it manually and not via Mach3.
Could someone please take a screen shot of their motor home soft limit settings on their cnc 6040 please.
This is the one...
See pic.
Mike
As you can see the 4th axis is not setup.
- - - Updated - - -
The pic should be there this time.
I bought this 6040T router. The electronic box I have is the one in the top picture 4 Axis CNC Router Engraver 6040 Engraving Machine 0 8KW Spindle Motor Ball Screw | eBay
Do I have a 6040Z?
...
I tried to find a toolstoday O flute but I can only find one for aluminium. Would you mind linking to the page for me please or giving me a tool number. Sorry for the bother but I just can't find it....
I need to cut this wheel for a wooden geared clock from 1/4" plywood. (see pic?) So I need a bit less than or equal to 2.1mm or 3/32" (approx). A clean cut would be nice. What bit should I use and...
I have decommissioned my CNC Router - over it. I now narrow it down to Lasers. What is a good laser to get?
Thanks Tweakie. That's a good one.
Would you have some funny signs or famous quotes dxfs?
Mike
Oh and a laser than can cut up to 6mm (or 6.35mm (1/4") plywood even better).
Mike
This question has not been asked on the CNCzone for a little while or as far as my searches told me.
I am looking at CNC Routers and CNC Laser Cutters.
I have a Shapeoko 2. I've had it a while...
It is probably a high tensile ½” UNC 13 tpi threaded rod. Patrick Hood Daniel uses it in his machine plans. I built his machine but have since upgraded. I blogged it here:
Mike's CNC Routing...