Search:

z0

I put the x and z on the p line and i was getting an error no matter what I did. I then was told that I had to change a parameter to be able to use a type 2 roughing cycle on a controler from the mid...

I figured it out. I had to change a parameter in the controler and everything seems to be working fine.

here is the program I am still unsure about the p line

g00g28u0w0
n10g54t1111
g96s300m04
g00x2.00z.100
m08
g71u.100r.050
g71p20q30u-.025w.025f.010
n20g00x3.780

I will try it out on monday and let you know. thanks for the help

I will post the program when I get back to the shop. what do you mean post the x and z on the p line?

sorry it is a fanuc 16t control

I am trying to use a g71 to rough an internal profile with an undercut. The problem is it wants to do the undercut with 1 cut. I am wondering how I can do this with a g71 type 2? I have never tried...

i have a fanuc 16t control and i would like to use a g71 to cut an internal profile with and undercut but the machine wants to do the undercut in 1 cut how can I get it to rough it first

Is there a way to do a master reset for alarms?

I am hoping someone can help. I have a daewoo puma 12lc with a fanuc 16t control i am getting a 2044 alarm code saying that I am low on hydraulic fluid or I have a leak. here is the kicker it is for...