Hi,
Check one of the settings for parameter 5002 - 5003
Type: Posts; User: Heavy_Metal
Hi,
Check one of the settings for parameter 5002 - 5003
Hi,
Normally when your Memory is write protected you have a (physical) key to put it ON/OFF.
What happens when you add e.g. 2. or -2. [+INPUT] in Edit or Jog mode to the [ Shift Value ] /...
Hi,
Your G10 L2 P2 is for a mill, not a lathe.
1st. -- I assume your lathe doesn't have the G54 - G59 otherwise you DON'T use G10, and especially NOT in X, only in Z !!!
2nd. -- Do you have the...
Hi,
Probably your first G76 line isn't okay, try;
G76 P020060 Q100 R0.05 or G76 P020060 Q100 R50
G76 X13.454 Z-50. P1227 Q300 F2.
Hi,
Check here for PDF manuals for the Fanuc-0i-TCcontroller.
https://cncmanual.com/fanuc/fanuc-0i-tc-fanuc/
Just visit the Baruffaldi website and scroll down to the bottom: https://www.baruffaldi.it/en/manual/
You can contact them because you need a login for download.
I have a pdf for the newer DB21 -...
Okay, no problem, ..... glad it's working again.
Try to do a tool index and look if the orange LED switches for one side to the other on the hydraulic solenoid (valve) for "lifting/releasing" the turret.
If it works the proximity sensor inside the...
Hi,
What brand turret, it's a Doosan alarm, did it throw a message for 2024.
Probably a proximity sensor.
Do you have the Electric Circuit / Ladder Diagram [Blue] Book, it contains all the...
Okay, it's possible it doesn't work.
I had a double spindle - double turret with Fanuc 18i-TB and the G84 didn't work on the spindle (centre-line), I had to use the G184 with live tooling.
In the...
Few questions, I assume you want to tap on X0. centre line with the main spindle !!!
Did G84 work before, .... can you do it with a live tool (G184) ??
If nothing works you can use a ER collet...
Hi,
I assume you have a YCM, on my MXP-100i it is something like:
Alert >>>> Metric example for rigid tapping with a M10 x 1.5 metric tap !!!!!!
....
G95 ( MM/REV )
M29 S300
G84 Z-20. R3....
Hi,
I assume you have a USB - 9 pin modem cable with the correct 9 pin to 25 pin adapter, there's no USB to 25 pin cable !!
When all hardware and software settings are correct it should work.
Btw....
Hi,
I can make a BIN-file for you with the programs you want to test, main and sub, you can make a simple one just for a few tools.
Your control needs the [ MEM-CARD ] and [ MEMORY-CARD ] soft-keys...
Hi,
Your story is partially correct and so is theirs.
T0101 calls Position 01 ( Geometry ) and Wear Offset 01, let's say you have a 12 station turret with 1 Tool per holder and you want...
Hi,
Probably one of the batteries, you can get a "low battery" alarm but it can also caused by the "hour counter" for those batteries.
On our 0i-MF we have to replace the batteries in the cabinet...
You're welcome.
Regards.
Do you run the edit program-tool straight from the software disk ?
Be sure you run the FANUCPRG.exe file from Harddisk or USB-stick to drag files back to PC.
Put the small software in a folder or...
Hi,
I found something on the Internet for the HAAS auto-door but for now it's OK, I find it way more safe when I can see what I'm doing then hoping all goes well with a closed door.
The Haas is...
Hi,
Yes you can use multiple Offsets on the same toolholder, there are static and live toolholders with 2 or more tools, also for main and sub spindle side.
I use multiple Offsets on the same...
Check the Fanuc Europe channel or search on YouTube for: [ How to expand CNC memory quickly? ], the Program is really cheap.
When your control has the [ MEM-CARD ] and [ MEMORY-CARD ] soft-keys you...
Hi,
When you have all the manuals sometimes there is a printed code of the ATC-macro in one of the books or Electrical/Ladder Diagram book.
Check all of them and maybe you're lucky to find it.
Hi darrellx,
If your Lynx has an Ethernet connector you could use the Fanuc - [ Program Transfer Tool ], it's a very cheap ( around 25 dollar ) software that transfer programs Up and Down to your...
Hi oetkbyentc,
Feed/Rev. or Feed/Min is synchronized with the spindle while tapping, you can check if you want, that's why Feed Hold doesn't work during tapping, only when it's move to an other...
Hi,
I assume you use FANUC because you're in the FANUC forum and you use the Metric system.
Within FANUC you can use G94 (mm/min) and G95 (mm/rev) for tapping, so two examples for a M10 x 1.5 tap:...
According the Haas manual they use a I - value in the G76 line similar like Fanuc uses a R for tapered thread.
It's a radial (X) value from start diameter to finish diameter (taper), it's no angle...
Hi,
As a European I can give you a Metric example for a Haas ST25Y Next Gen control for a Metric Fine thread M18 x 1.5
It's a M18 x 1.5 mm pitch with the numbers you can find in a thread table or...
Hey,
Try one of these sub-programs, be careful ... it's written in Metric !!!!
Rigid Tapping with G94:
%
O1010( TAP - M5 X 0.8 )
G00 G80 G90 X50. Y0. Z50.
G94(MM/MIN)
M29 S1000
Ok, I can't help you with this one, our "oldest" Fanuc is an 0T and it says LSK when it waits for a receive from PC
OK, try it the other way around.
In EDIT mode -- O1001 [ READ ] or [INPUT ] then on PC-side [ SEND ] via your DNC-software.