Search:

thats the program there....

i know this program works if i put it into the internal memory but i cant drip feed it, it gets about 20 lines in then throws up a 004 alarm.

just quickly if anyone...

%0000
G00 G90 G54
G0 G91 G28 Z0.
M05 G40 G49 G80
M09
M06 T1
M1
G00 G90 X-89.997 Y-61.646 S4000 M03
Z10.M08
G00 X-89.997 Y-61.646 Z10.

Hi guys,

i have adjusted the fifo buffer so i have now turned them off and added a timing delay but its still coming up with the 004 ps alarm after the first few lines...

i cant seem to get...

Yes I'm using a serial to USB, I will check my settings in the morning and see what they are at the minute.

In theory shouldn't the machine fill it's 16kb memory then just keep dumping used data...

If I send the program to the internal memory it works fine so the program isn't the issue.... Is it not?!

It's how my laptop is sending it to the machine...

As if it's stopping in the middle...

i shall try the timing at what you suggested, i also have a format setting which has ignore line prefix nad abox to enter txt and a check box to remove spaces. final setting is to add to the end of...

Hi,

we are having some major issues getting this machine running, i have searched as much as i can and now getting differant answers for the same problems if i tell you all i know then hopefully...

Not sure I'm going to the unit this am so I'll check the motherboard and parameter and let you know

Just to clarify I can get programs in using rs232 but not drip feed that's what we need to do...

im having similar problem with my fanuc om-b i have a rs232 cable attached and can send programs to the machine but i have no tape mode... is it possible to run dnc?

right chaps we have spent a fortune trying to get our own machine up and running and so far not had alot of luck!

we plan to make Motorsport parts but i guess thats not some thing you need to...