Hi Manthan
That is the locking device for the tool presetter.
Unfortunately I do no have one.
Sent from my BV9900E using Tapatalk
Type: Posts; User: ace of spades
Hi Manthan
That is the locking device for the tool presetter.
Unfortunately I do no have one.
Sent from my BV9900E using Tapatalk
Hi Willy. I see this has been hanging here for a while. I have a 5i25 / 7i76 on an Emco and a 7i76e on a Takisawa. I don't have any problems with either one of them. The 7i76e is just easier for me...
Hey Ridley. LinuxCNC does not play nice with USB to serial. Your USB is not a realtime device and LinuxCNC runs realtime.
Either use a parallel port or, if you want better performance than that,...
Hi smmoorthieee. I have a full control to part out. I have retrofitted to Linuxcnc. Don't know where you are, but I am in South Africa.
Hi Jokky. I was in a similar situation a while ago. I bought a TC-10 Taki with 21 control.that was neglected. I sourced all the components and when I eventually got to switching on, the parameters...
Thanks nitr1c. I bought the machine (Takisawa TC10) knowing that it had a lot of work before it can run properly ( that means a looooong project ) . I have fixed her up rather well and the last few...
Hi Guys
Hope someone can help me.
I have a 21TB control with a busted CRT. I have sourced a 2nd hand CRT, but it was on a GE 0TA control. Thus the differences on the CRT's are A61L-0001-0093...
I have a 6P With libuxcnc. Not straightforward though. Ripped out the old steppers and spindle motor, so, some hardware are different. I can mail my config if you need it. Just PM me.
Kriek
Hi Forda, thanks. I found the Fanuc manuals as well after posting on a CNC specific forum. The Takisawa manuals are elusive though. I will search some more tonight.
Thanks again.
Hey guys
Hope someone can help.
I am still searching the forum, but....
I bought a TC-10 that has been standing around two years.The IO board is missing, but it looks as if that one is...
Haven't been on here for a very long time, but there is good news :banana: :banana: :banana: :
Bought myself a retrofitted Emco Turn 120P.
Highly excited. Can't wait to get everything sorted and...
You guys can try Leitz tooling.
When I still worked for Vesco, I always bought Onsrud cutters from them. They make a huge range of tooling for anything and everything non-ferrous.
Tel: 011...
Hi guys
Before I put this up on Junkmail or OLX.
I've got an Iscar ITS boring kit
BHF MB 50-50x60
I want R10 000.00 for it[/SIZE]
BT40
45 degree pullstud (easily exchangable)
Didn't read further, thought you alredy compensated for the look ahead. In N44 you have M5 and M9.
You can only use one M code in a line, thus move either one to the next line.
Hi there
I don't know fadal or the cnc88-HS control that you are working on, but I do have a suggestion.
Remove line 42 and see if you get the same alarm on line 43. If so, there must be an...
Hi All
Been on CNC zone for a while, but always pop on for some troubleshooting rather than leisure. Live and work in Virginia, Freestate, thus club meets are out. Dou you video or minute the...
This is how our feedramp and proxy setup looks like:
http://i486.photobucket.com/albums/rr230/fzraceofspades/haas%20servo%20bar%20300/S7301748.jpg
Can anyone spot the missing parts? Gues?
...
Found out what was wrong!!!!!!:banana::banana:
Where is the "SOLVED" button.
Have not been able to run it, but it will definately be the culprit. The proxy and the proxy "cam" has had some...
I'll check with the Artisan that has done the setup thus far, actually I must start from scratch. I stepped in and started troubleshooting when he took two days for the setup. Nowadays I am so busy...
Any takers?
Hi all, hope someone can help.
I have a SL10 and servo bar 300, acquired them 2nd hand and had them serviced by our HFO. We have not had any real use for the barfeed up until now and suddenly we...
Thank you, much appreciated
What is "CC3", "FD3" and "RJH" ?
Factory lists it as part of the Bill of material on a 2ndhand machine that my MD wants to buy. It is the only codes I do not know
I must say firstly that I am not a Haas fan, I have grown up on Fanuc controls and Taiwanese machines.
Having said that, I can not argue the fact that the Haas machines does their job that it is...
Hi all
Hope someone can help. I need to know what a couple of Haas part nrs are:
30-1821 Complete CC3
32-0513 Complete FD3
32-0524 Complete RJH
These part nrs are for a VF5 2k5 model
Hiya
Anyone out there that can help me?
I have to manufacture a rifled nut for a customer. The pitch on the nut is 900mm, six "splines" or "rifles". At 1 rpm, the best that our TL1,TL2, SL30's,...
I really hope that someone can help me here.
I am in the market for large diameter collet chucks.
1. A2-6 spindle nose. I am looking for 3 chucks and collets that will be able to give us a...
Hi Beege
I use Wedgelink from Microridge, multiplexers and Mitutoyo instruments. Measurements are taken at the machine and wedged into a spreadsheet. Data is reworked to be usefull for the...
:drowning::drowning::drowning:
Any takers???
You can try this link to microridge, they also offer a wireless system
http://www.microridge.com/wl_mobilecollect.htm