What cutting size would you need?
Type: Posts; User: stekke_stim
What cutting size would you need?
I would recomend going With the BOFA exellent filtering! If you need more information PM me.
I also have a chinese hepa filter, it is good for fumes but not for smell. That i why i bougt a BOFA.
Hi Tom
For the cutting at laser head place: in lasercut on the left side just above STOP there is a checkbox with immediate. when this is unchecked the laser will go to the area where your item...
Maybe there is a bad connection from the y-axis connector. Have you double checked the connection?
Problem Solved
Lasercut was slow due to the fact that the dxf file was not smooth.
After importing the DXF file into coreldraw and exporting again as dxf the file was calculated and loaded...
Hi Traci Thanks for your reply
On IC the back on the display the version number is 4.0.3 and on the controller card next to the stepper drivers it is V4.1.3.0 and its a Leetro 6515.
I received...
The size is 69x54cm
Speed 12 and Power 75% (W2 reci)
http://i928.photobucket.com/albums/ad124/stekke_stim/random/Lasercutslow.jpg
Hi all
I am having some trouble with lasercut 5.3
I recently purchased some puzzles from Makecnc.com.
When i import the DXF file, fit the needed parts to my cutting bed size (600 x 900) and i...
Hi
I am looking for an excavator like this
http://woodcraftconstructionkit.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/e/x/excavator.jpg
I do not mind buying...
Hi all
Can anyone tell me which type of autofocus sensor is used in Gweike LG900?
Yesterday i was cutting some wood, after finishing i turned off the machine. I powered it up again this...
Thanks for the info Dave, Appreciate it!
I figured it had to be something like this.
Are there any settings you can change to make the time more accurate?
I have the same problem but not by 60% last night i cut something that would take 9.18min according LC5.3 and on the machine it said 10.13min when it finished
so your machine is from Gweike?
Looking forward to follow this thread. I want to buy the LG900 From Melody. Still waiting for some paperwork from the bank.
Hi marco
Maybe you can remove the hinge from the door and put rails like those from a drawer at the sides so you can slide it open?
Or an other possibility is to cut the cover in 2 or 3 and...
HI i am looking for a laser cutter that can cut and engrave 2 - 3 mm plexiglass and cut 2mm aluminium.
I do not have a lot of space so i was hoping on a 60 by 40 cm working area.
What do you...
how is the building going?
Going to follow this. I want to build my own cnc plasma cutter.
(Groeten uit Vlaams Brabant)
Regards
Stekke_stim
Hello
When i try to download the images or files from v4 pictep controller i get "page not found". www.fromorbit.com | Where ideas can hurt!
is there an other place were i can download the...
i'm not an electronics genius to build my own power supply:cheers:
the breakout board is considerable but if it isnt working ; a breakout board isnt that expensive.
And what do you mean...
I have found a seller on ebay with a nice stepper kit:
http://i793.photobucket.com/albums/yy212/yuntat/3x22kgcm-MircoSet.jpg
3x NEMA23 2ph 22kg.cm Step Motor
Maximum Holding Torgue 308 OZ /...
Hi all me again
Yesterday I took some pictures of my temporary workshop :D our workshop is in the backyard but there is no heating in there so my temporary workshop is in the garage now :D
...
Hi all
I'm Stijn I’m 18 and I’m from Belgium and I'm going to build my first CNC router.
I want to build one because buying one is much too expensive for me.
First I’m going to build the...