I'm having the exact same problem. Did you ever find a solution?
Type: Posts; User: Andypcguy
I'm having the exact same problem. Did you ever find a solution?
This one from IMService is pretty affordable. IMService ATC - Automatic Tool Changer for CNC Mill or Router
- - - Updated - - -
This one from IMService is pretty affordable. ...
You might want to take a look at how I did mine. I did use the gas pipes at first but had problems with flex. I then tried filling the pipes with cement. That did help but I still had too much...
If your considering building a JGRO I would look at doing something different in X. I initially built a JGRO as drawn in the plans. I found that when the gantry was in the center of the table I had...
I think you need a spindle encoder so that the control software will know how fast the spindle is turning. The Z axis has to be advanced in relation to the speed of the spindle.
I just purchased one of those Spectralight 0400 turning centers and I also purchased a 3 axis motor controller from www.easy-cnc.com Do you have any information about the type of stepper motor that...
Bitex
Your english while not great isn't too bad. I can understand you at least. You english is a lot better than my Romanian. Cheers.
Those Anilam controllers are PC based so you can use a standard pc monitor in place of the old CRT. If the only problem your having with it is the monitor then you'll save yourself a bunch of money...