Search:

Did you input the tool diameter 1.25" in the tool table for #120?

If diameter is set at 0.0" mine looks like yours.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Shineworld, I thought you had run my code in mach3. I enlarge the picture and squint my eyes and see the RosettaCNC at top.

Im very interested in RosettaCNC, but can't find much info from users....

Shineworld, do you have the tool diameter loaded in tool table for tool 120?

Sent from my SAMSUNG-SM-G891A using Tapatalk

Did you upgrade from mach3?

Sent from my SAMSUNG-SM-G891A using Tapatalk

Mine is on a mill with multiple fixtures and multiple work offsets.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Ill check out that control when i get home on my PC.

I have multiple parts with multiple fixtures. I need to be able to mix and match.
Thanks for your help. The machsupport.com forum is a ghost...

I looked at your link, but I dont even know what its talking about. Is this a new controller software?


I really need something similar to Mach3, as I need to be making parts instead of learning...

It may be my 2015 version of mach3

Sent from my SAMSUNG-SM-G891A using Tapatalk

My config settings are same as yours.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Mine does that if I have the tool table loaded with tool #120 as Dia. Of 0.0000".
Did you run this after telling it the diameter of tool is 1.2500"?

Sent from my SAMSUNG-SM-G891A using Tapatalk

Ive ran Mach3 on my mill for a few years now.
What is involved in upgrading to Mach4?

I bought everything from CNC4PC when I retrofitted the machine in 2015.

Thanks.


Sent from my...

I'm using G41 so that my bore sizes come out right, no matter if tool is slighlty over or under size. Works like a charm everywhere except Mach3 with multiple offsets.

I have begun to find many...

Terrible pictures of the display, sorry.
First picture I select G54 as active work offset. Second picture I select G56 as active work offset.

If someone can confirm that Mach4 takes care of...

Im working on posting the code and a couple pictures of the simulation display.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Not to sound arrogant, but this is not a code error, rather a Mach3 bug with cutter compensation G41/G42, when using any offset other than the currently selected active work offset.
I can literally...

Hi. Mach3 on Mill.
I have many parts which have 2 operations. I have 2 fixtures mounted to my table. Im using G54 for one fixture, and G56 for the other in the same program. Mach3 will machine...

I am tuning the same combination today. Any pointers? They move fine without tuning, but they vibrate bad, and eventually get very warm.

Included:
3 servo driver cards
Motion cards
Power distribution cards
1993 gateway 2000
Monitor console
12-15vdc power supply
24vdc power supply.
And more that I can't name.

sorry if this is the wrong place to post. I didn't see a classified section.
My PLC that controls spindle, tool change, air brake, and power knee went out. It still runs a program and the servos...

Figured that out too. I found the "shift" button that gives me the G53 option.
The 1400m manual I found is quite a bit different than my S1400.

ok figured that out. Bad floppy disk.

Then had some bad wiring on an encoder to chase down.


Now I've customized a BobCad post processor for my s1400 and have it working well. But I'm unsure...

Ok. Now I'm in need of a quick answer to a dumb question.

I can use the Anilam's PC to format floppy discs, I can scan A: (floppy) and it tells me how much free space and such.

But, I cannot...

Got it hooked up.

Had serious boot up problems. Found that the Gateway 2000 PC had dead CMOS battery, and dead 4.5v battery pack that is Velcro attached to the bottom of the hard drive. Replaced...

Hello all.

Picked up about a 1992 Eagle 500 with Anilam 1400 controls.
I didn't get any tooling with the machine. I need to confirm that the spindle is nmtb 40.
Has anyone had one of these...

0-262.1* Is the safe zone. 262.2 + Will give me an error.

I wasted 4 hrs yesterday and found that when I start a bolt circle at an angle greater than 262.1* it will error at that line and upload at 0* and no lines after.
Now i have no problems.
Thanks to...

What codes does yours use for bolt circle?

PN24130001 G20;
N001 G104 XC0A YC0A HL06 R3.563 A359.66 T01 ;
N002 G105 FE001 LE001 XO0 YO0 RE02 D0.563 T02 ;
N003 G100 X-1.164A Y3.197A T03 ;
N004 G100 X-0.591A Y3.35A T03 ;
N005 G100 X0A...

I dont use cam or anything to generate the code. I program the prototrak plus manually. I can send and recieve files fine. Some files i modify in notepad and the upload to the prototrak plus...

Where is a good source of info for editing my programs in notepad.
I keep getting "RCV BAD DATA" when i try to send it back to the PT+.
Help me out with this and ill show you guys how easy a live...