Hello All,
I retrofit a cnc turning machine. The controller and PLC program was similar to FANUC. The controller came with 8 station tool turret program and what my old machine was with 12...
Type: Posts; User: shanu4454
Hello All,
I retrofit a cnc turning machine. The controller and PLC program was similar to FANUC. The controller came with 8 station tool turret program and what my old machine was with 12...
Hi,
did you find any solution for this problem? Am stuck with the same alarm 5136 and 750 . Please help me to fix it
Iam using Romi Bridgeport Powerpath 15 lathe machine which using fanuc 21i-t controller. When i press Home Zero button it shows alarm "300, 306, 309" Alarms. When i check i can found that its...
The Lathe machine which am using was ROMI BRIDGEPORT POWERPATH 15. please help me to figureout what the problem is
If i check by changing the valve which is used for rotating the turret clockwise and anticlockwise i can able to take the index ring forward and backward. But it is not possible by using tool change...
Dear sudip,
Thanking you for your reply. How can i check the turret encoder? Now i removed the encoder. when i give the command for tool rotation the turret keep on rotating and after sometime it...
Hii
I have a MK 2/4 probotix board and HY 02 D 223 B for turning KL-2200 spindle. The problem is that i don't know how to connect the VFD to the breakout board. Can anyone figure out the output...
when i switched on the lathe machine which is using Ge fanuc 21i-t controller shows an error message as Turret out of position..
Before that the shows 2 errors.
1) Reference reqired
2)...
HIi guys..
I have HY 02D223B vfd and KL-2200 spindle motor. I give the connections to spindle from the motor and it works fine.
I need to run the spindle from PBX-USB CNC control board...
HIi guys..
I have HY 02D223B vfd and KL-2200 spindle motor. I give the connections to spindle from the motor and it works fine.
I need to run the spindle from PBX-USB CNC control board...