I got the 3 wire version. Thanks again for the help.
Type: Posts; User: Guerra Cues
I got the 3 wire version. Thanks again for the help.
Thank you. I think it is a 8mm. I have ordered one so let’s what happens.
My bad, I meant cat5 not RJ45. It was a friend that made the made proximity switch which is what this one is.
Sorry I am not very Cnc technical savvy.
I was just trying to buy the correct item or...
The connector is on the pucture, not RJ45.
One of the limit switches cable I had on my Cnc broke and I need to buy a whole new assembly.
Can anyone point me out where I can get it? I would prefer ready to go since I’m not really good with...
I cut usually 1.5" from square to round, sometimes 2" square and about 30 to 31" long. Finished size is about 0.845" to 1.250"
Hello Andrew,
Router for sure with 4th axis. Something like this or similar:
14" X 36" X 8" TRAVEL.
(X) (Y) (Z)
20MM UNSUPPORTED LINEAR SHAFTS ON THE Z AXIS.
16MM SUPPORTED CYLINDER LINEAR...
Hello,
I am looking to get a new CNC machine. Looking on being able to work with wood turning and looking at about 18x40 or 18x48, as long as I am able tor turn 32" between centers. Geck 540...
Hello all,
I am buying a Mini-Raptor 18x48, is there any assembly instructions on the machine?
Thanks,
Tony
Hello folks,
I just received the T-Bolts for the compound of the top slide for my Jet BDB-1340... The threads are worn and I can't even tighten them down anymore. I removed the compound slide...
I agree. I am full blooded portuguese (born in Lisbon but live in California) and this section should be renamed Portuguese section. Portuguese is a language, not brazilian. Portuguese is also one of...
Thanks Jeremy. Yep, I end up buying from that guy.
Thanks again,
Tony
---
- Sent from my iPhone using Tapatalk
Man do I love this forum...
Thanks for the help Hoss!
Hello folks,
I am in need of buying 22 feet of 4 wire shielded cable to complete the wiring of my CNC. No sure if I need 18 or 20 gauge... Can anybody point me out to a place online or even a big...
Hey Gerry,
Thanks for the reply.
I am thinking about getting the control box from Kelling and I still need about 22 feet of 4 wire shielded cable so I can finish the soldering. After that is done...
Hello folks,
With the help from my friend Wes "AKA metalworkz" from Modesto, I am trying to continue my Dorsal's built since I've purchased his CNC from his estate.
Few questions starting to...
Hey folks,
Just bought from a friend that recently passed away a Joe's CNC Hybrid 4x4.
I am totally clueless on what do I need to finish this up. I know that the 4 axis Gehko controller is not...