Issue Closed. Malfunctioning tool tip sensor. Swapped it.
Type: Posts; User: interzis
Issue Closed. Malfunctioning tool tip sensor. Swapped it.
Hi everyone,
I've had this machine for a while now with no major issues.
Now, I changed one of the tools and I need to do a Tool Tip Measure. I've done it before with no issues, but now I'm...
No, the right arrow is useless in that pictured screen, it does not show any other option
It seems I don't see that screen...
No other options available :(
http://uploads.tapatalk-cdn.com/20160403/81f678a1a9f3f7b1796e6e7f8416ac0b.jpg
mobile...
My machine have 5s, not 7s. Will help?
If yes, let me know where can I find the servo tuning screen
^ right!
mobile...
yes, this could be a solution but you have to do it daily and I don't like it
I have custom made machines with master/slave independent homing even for Y and Z axis, driven by a simple Mach3 without...
SOLVED!
the issue was generated by norton's f***** smart firewall
now I have to figure out how to resolve the other machine's problem: squaring the gantry
the way I like is to add a home switch...
thanks a lot for involving
for now, I give up
I'll take another computer with a clean W7 on it
it seems this W10 is messed up and I cannot spend more time with it
again, many thanks
I'll...
thanks for your fast reply
same on my machine, the name is like the computer's name where I created the shared folder
I also changed the 3213 parameter to 3 (for network folder) but the machine...
Hello,
Newbie for SYNTEC controllers and...
I have to set up the network for a 6MA.
The machine is connected to the LAN, IP assigned by DHCP
Pinging the machine's IP from LAN is OK - I have...
Hello Mihai,
Nice to see your project
Also, thank you for free sharing your work
Regards,
Seb
I tried to use an USB adapter, nothing changes, the ProTuner software still show the "Unknown drive" error... :(
Hello,
The provider told me there is a problem with the application itself but for some other customers this issue was solved by using an USB2Serial adapter...
Right now I don't have the adapter...
Hello,
Any news regarding the availability of these manuals? I'm also interested about manuals for AB OSAI OSS200 drivers 286174X and motors 286022J
Thanks
Hello,
I just bought some ES-DH2306 Leadshine drivers, paired with ES-MH342200
The problem is I cannot connect it to the PC for tuning with ProTuner v1.3 software (from 3 different sources, minor...
have you set the correct speeds and accelerations in your machine definition?
use MachineIdEditor and check them
yes, the default is G54 but only for the first position (in Solidcam)
the second position, if created (for the same part), will be G55 and the gcode will be generated according
do you have many positionn declared in coordsys manager?
first position is for G54 fixture, second position is for G55 and so on
if you make a gcode for second position (g55) you have to use the...
thanks for the tip but I switched back to SC 2012
it seems the gouge checking is not available for 3D Milling operation...
thanks for the advice, I'll check later
regards
as I told you before, I'm new user of SC but this release, at least, seems to have a lot of bugs
the tool are moving through the restricted surface, the pictured case is a small one
the toolpath...
I also have similar issues but with 3D Milling / finishing operation, same SC release
But I'm also a new SC user so I cannot tell you for sure if is SC or me but I suppose it's a bug somewhere...
...
hello,
can you share the post-processor files for Mach3?
thanks!
hello
long time ago I tried to play with MDF
I made a "sandwich design", see here:
CNC Hobby Mill - Z-axis - first run - YouTube
Unfortunately I had a HDD crash and I don't have the CAD...
Hello,
Long time ago I also had my machine with fixed gantry but it design it to have the possibility to put it on linear blocks and change it into a moving gantry
For Z-axis I like another...
Look for GWizard, will help you a lot
Sent from my Vodafone 975 using Tapatalk
an useful calculator, helped me a lot
File:Motorcalc.xls - TAMI
I'm not familiar with huanyang vfds but when I have to made similar settings on my Fuling inverter I had also to set some jumpers into proper position
I see in you vfd's picture you also have some...