Just a follow up to let everyone know that I was able fix my Real Time Clock (RTC) issue.
I found some New Old Stock DS1286’s on EBay. I purchased 5 for $25 including shipping. They had older...
Type: Posts; User: mgsanchez
Just a follow up to let everyone know that I was able fix my Real Time Clock (RTC) issue.
I found some New Old Stock DS1286’s on EBay. I purchased 5 for $25 including shipping. They had older...
Ok, I think I know why my Mini Mill won’t retain it’s date/time. I believe that the battery is dead in the Dallas DS1286 IC chip. It is in an IC socket and it is just a matter of removing it and...
I purchased the Mini Mill new in 2001.
My Mini Mill won't retain date/time when I turn the machine off. When I restart the machine the date is 06-26-2066 and the time is 26:66:00 ( Back to the...
You don't need a "cracked" copy, you can get for free here
http://www.haascnc.com/training/Misc_PDF/PCQC%20on%20Web.pdf
This should do it for you.
Setting 19 "Feedrate Override Lockout"
Mike
Bummer!
I sounds like they don't want to get better. That only leaves you with a couple of options, put up with it or find yourself a more progressive shop to work in. You just might get...
PBMW
I did some checking today and found out that the linear scales (XY&Z) option are accurate to one micron. I also went through an old inspection report that had a few holes in it and the...
+1 for Widgets
The tightest I have to hold with our machine is 0.002" true positions and it does that well. Bear in mind that I have the linear scales option. I have not had to hold 0.001" true...
Anybody know what it would take to upgrade to the new LCD monitor, or even the older one? My monochrome monitor has been flickering for a while now and it is driving me bug eyed. Haas tech said I...
I run one just like that! It is loaded with all the options including glass scales and a 10k spindle. If you are looking for fast, you will be limited on the rapids (see Haas' specs) and to 80IPM on...
I worked in a shop that did something similar to us. We also did short runs, 5 to 10 parts. Then I asked myself, self, how do I increase my cycle time? I guess I could make my parts take longer or...
Same here!
.
Yea, I used to hate that also.
Now I program a block delete before my M08's, "/M08". Just turn on the "Block Delete" to omit the "coolant on" and it works exactly like you want it to. I found...
I now have a Kurt D688 mounted on my Haas Mini-Mill. I have the vise mounted in the center T-slot and there is enough room for the handle. I do not operate the machine with the handle on the vise. ...