Search:

Great looking Guitar and what I really want to know is what is the music on Utube.
regards
chris f

Steve,
thanks a lot for the camtasia presentation it is awesome.
If you do not already do this for a living, you have just found your niche,
Presentations like this should cost money, thank you....

Alex I must admit I have never used or imported a solid into MC and have generally used IGES files.
Possibly you will need to: create, surface, ruled/loft, select the entities and go on from there....

Looks great,
you can also try machining at angles to get different results in timber IE across the grain at an angle .
When you verify, up the quality selector and the surface ( from experience )...

DJ trust me this was a real problem,
What I also did was go to http://www.eapprentice.net/lesson_2.html
check out the "free " lessons on WCS it's in X but I worked out how it could be done in v9...

This may assist.
create a bounding box, then toolpath, surface, pocket rough .
Select the side surfaces or all of the surfaces and machine the entire body using a spherical ( ball type tool) with a...

From what you have requested I would recommend either Visual mill or Mastercam router pro
cc

Thanks Guy's yes I did go back and try again. I found psycomills idea a lot easier as I still had drama with your method DJ but thats just my lack of experience in this sector of MC not having used...

I just tried what yo suggested DJPLAST but all it does is rotate the geometry around in a 360 circle with varying degrees that I input.
Maybe I did not explain properly so here goes.
Imagine a...

I am doing some part time work at a company using MC ver 9 and I have hit a snag.
What I would like to know is if you have created some geometry IE: the neck of a guitar and placed surfaces on it...

I am darn glad I read this forum as I was about to order the Centroid control with the works to convert my SCM router, after this thread, absolutely no way a centroid.
Unfortunately it's back to...

--------------------------------------------------------------------------------

I have a SCM 3 axis router, model is a 1994 Record 2 C.
Input power is 3 phase 380 volt 50 Hz.
It also has a 9...

I have a SCM 3 axis router, model is a 1994 Record 2 C.
Input power is 3 phase 380 volt 50 Hz.
It also has a 9 drill block and auto tool changer of the carosel type 10 tools.
X is 3200mm (45...

I have the Yaskawa CACR-SR 15 E servo drives on my CNC.
One of them blew a few bits up and I have had it repaired.
Problem is when I power up the CNC it comes up with an A02 error which according...

I guess I am a little late jumping in here, but I have a huge CNC standing idle most of the time.
I can write G code programs to do just about anything surfaces etc, but I struggle to draw CAD 3D, I...

I have had good success with ABS etc.
Firstly I have found that the rotation speed on a 3mm cutter needs to be about 9000 rpm, ( I tried fast at 18K and all it did was melt everything back together...

I have a 1994 SCM Record 2 with a NUM 750 controller, it is a good machine but dated software/PLC/screen, small memory etc.
It is a 3 axis, brushless Yaskawa servo drives, 10 hp spindle to 18000 rpm...

Karl,
to the best of my knowledge and as a long ex user with MC go into edit the .PST and under general there is a switch that will make the post either output R or I & J, personally I was happy...

How much and how does it work, and of course does it work?
chris f

Very easy answer, get your boss to buy the programming manuals I got ready for you and all the answers you seek are there in the books.
vamvany

As mentioned above previously, I have a full set of the works manuals for this machine that I prepared for the SOB alchemy who then did not buy them.
They are available for US$150.00 if you want...

I have a full set of Programming and operating manuals Xeroxed for you as requested.
Please let me know when you are going to pay for them and I will ship as soon as I get your address from you....

AhmedJ and Al.
my failure was the power transistors on the FUJI and to Ahmedj, you have the same problem OC3 means over current which is caused by the failure of these components to control the...

Thanks Karl, I'll check the Galil site.
chris f

I thank all for the input.
What I guess I am nervous of is the hardware connections, I am fairly good in this area
BUT I do not know how the kits are sent and whether I have to source plugs and...

yes but I need you direct email address because I do not know how to attach files on the zone
chris

The tool change should be standard ISO programming that is for example
T1 M6 for tool 1 M6 to change the tool.
To try this out in MDI (manual mode) you select MDI mode
and key in
T1 M6 and LF (...

Thanks Al I will have a look at that.
It says the temperature is 32C but the problem began immediatly this morning after the unit had been sitting for 12 hours, it was an immediate error this...

Has anyone out there converted a CNC router like my SCM to Camsoft.
My router is a SCM Record 2. 3 Axis, plus a drill block, 10HP spindle to 18000rpm, It has Yaskawa brushless servo motors and each...

DNC Max ver 5 is awesome, and will do exactly what you want.
You can get a free full working download for 30 days.
chris f