I have a client that needs to update much of their shop software. Currently they use 32bit MC X6 stand alone, and the reseller is suggesting that when they upgrade, they consider MC for Solidworks....
Type: Posts; User: microdot
I have a client that needs to update much of their shop software. Currently they use 32bit MC X6 stand alone, and the reseller is suggesting that when they upgrade, they consider MC for Solidworks....
Anyone here using the CAM inside Solidworks for post paths for you Accumove 2 controlled table?
µ
Do you have a post for the Accumove 2 control?
Thanks
Hi all,
I have a Torchmate 4x4 table with a Hypertherm 45 with machine torch. Even with the machine set at 30A and 30A consumables (Not really fine cut consumables), the table barely moves at the...
Jim (or anyone)
Are there fine cut kits available for the powermax 45 machine torch? I can't seem to find them on any of the sites that I have bought Hypertherm consumables from.
If s, do you have...
I may have an Older THC I'm not using. I won't be back in the shop till Friday but I'll get details then so stand by.
New C&CNC Plazpak 1A 4ax system
The is a new never installed C&CNC Plazpak 1A 4 axis system with the latest Ethercut system and DTHC IV, Comes with Mach3.
...
I have a table project that I have to part out with a never installed C&CNC plazpak 1A system with Ethercut and DTHC IV. Contact directly for more details.
[QUOTE=PlasmaPal;1586734]We had a lot of torch crashes when we first bought our table. We developed a collar that clamps onto the torch and three spring feelers sense the top of the metal to prevent...
I use a 4:1 reduction via an 18:72 HTD belt set up. Works great.
µ
JV,
Thanks for all this. I recently bought a PS, DQ860MA Drive and NEMA34 stepper from Wantai. I'm going to be controlling them with an Arduino to make a 2ax rotary positioner for welding.
I...
I'm building a rotary table for a laser scanning rig that will be controlled by step and direction signals sent from an Arduino. The objects that will be positioned on the table are fairly large and...
Thanks jim. That is exactly what I had in mind. I have a few spherical neodymium magnets that I was going to use as both the locating and holding power. With an e-stop switch placed so that if the...
I have a question for everybody running a CNC plasma table. Have you ever had a torch crash? How bad was it and was there any damage beyond just knocking the work piece out of alignment (relative to...
Welcome to the world of CNC. As you get more experience under your belt you will mill the hard bits less and less, but I can tell you that even after 15years that problem never fully goes away.
...
And a Pic of the water table more or less done...
Got some time tonight to work on things. i picked up a couple of linear rails on Ebay as well as a 56" piece of 8020 extrusion (3060 15S). Tonight i drilled and tapped the 50 M4X0.7mm holes to mount...
Estoy tratando de modificar mi procesador mensaje a la salida el código correcto para el roscado. Tenía la esperanza de encontrar a alguien con un procesador de mensaje correcto para Mastercam. Me...
bump
Slowly. I have the water table and tank finished and am just waiting on the rails for the main gantry. I have the steppers, timing gears and a piece of 8020 AL extrusion for the gantry. I just...
Hi all,
About Dec of 09 I bought a Hypertherm Powermax 45 (I love it). Being a gearhead and a machinist with both a VMC and Turning center, I immediately decided I had to build a CNC table. I've...
candcnc.com
Nice! That is a better finish than I would have expected. Very clean.
For those of you that have water tables, what size did make them? Here's my dilemma... I have a 4x8 sheet of 1/8" steel and some 6"x 8' strips of 1/8" steel I could easily weld up a 4x8 water pan but...
I'm designing a 4x8 table and was wondering, for those of you who made water pans, how deep did you make them and why? I'm currently thinking 6" for mine but want to make sure it isn't too shallow,...
Thanks for clearing this up Jim. Much appreciated. :cheers:
I'm finally ready to buy a plasma cutter. I want to be able to use it to cut by hand and use it with a CNC plasma table i have yet to build. I've have settled on the hypertherm powermax 45 but have...
+1000
What's the reason for spring loading the pinion gear assembly against the gear rack? If the rails and gear rack are aligned properly shouldn't you be able the mount the gear in a fixed (rigid)...
¿Es usted la programación de su Sinumerik 810T control con Mastercam? Estoy tratando de resolver problemas con el pisa y CSS en mi postprocessor y la necesidad de encontrar a otro usuario con el...