Minimum should be 8000 unless you want to burn your bearings up. Less than 8000 it won't produce enough air flow to cool it.
Type: Posts; User: mpoling
Minimum should be 8000 unless you want to burn your bearings up. Less than 8000 it won't produce enough air flow to cool it.
I can confirm that Mach4 works perfectly with my CNCRP Pro 4896. I used it with a router initially but recently upgraded to the spindle. I also have a laser attached from Endurance Lasers. If you...
It will support power level changes with the M3 Sxxx command (where xxx is the power level % you desire.) Increments of 1%.
Just added a 10W laser to my 4896 Pro CNCRP machine.
I got the laser from EnduranceLasers.com. George is great guy and helped out a lot. I have a video of the main setup here and I'm uploading...
Hi all, This probably has a very simple solution, but I'm drawing a blank.
I have a 48"x96" CNC RouterParts CNC to which I have added a 10 W diode laser mounted off the spindle mount. All the...