Welcome - Tony from Barnsley (Not too far away)
Type: Posts; User: Drakkn
Welcome - Tony from Barnsley (Not too far away)
Hi guys
In the process of building a small desktop mill and need someone to do me some parts - I had a cnc machine for a while but since moved to a smaller place where I could not take it.
I have...
Great stuff - hope it works out well for you - bob works fine for me , however soon to update all my electronics as have had some trouble with the DIV168N boards - fried quite a few so I will be...
Hi , It's main job will be with wood , and hopefully aluminium to - as for flexing currently none is detected- The rails are 20mm dia from marchant dice.
Thought I would start a build thread as I have been building my control box and testing motors etc.
If anyone has the HY-JK02-M5 break out board with HY-DIV168N-3.5A drivers then this will help...
http://www.youtube.com/watch?v=LC3iBvepcqI&feature=youtu.be
Just a quickie
Update - motors up and running and tested - for those of you out there with HY-JK02-M 5-axis interface board - the pin outs are wrong in the manual.It took me ages on testing to get it right
...
Right then guys - the machine is now assembled - Just have to sort out the electronics and hopefully start cutting soon .
It's been a long time (Frustration and money) slowed down the build . I have...
Things moving on nicely , I am having a few parts made here in the uk for the build , whilst waiting for the ballscrews to arrive , Also a 300w spindle/bracket/psu and speed controller will be with...
Next stuff to order will be
1 piece SFU1605 Ball Screw L1000 mm+1pcs Ballnut+ends machining
1 piece SFU1605 Ball Screw L610 mm+1pcs Ballnut+ends machining
1 piece SFU1605 Ball Screw...
Frame is now built - Taking ages on this build due to only being able to buy bits when there is a bit of spare cash
205638
Well after a long break my machine is suddenly starting to look like being near completion.As always finances get in the way.
Here is a picture of what it looks like currently - Foot print is 1000mm...
Hi , Not done any more work on the build - but will update with the motor testing soon , nearly got everything now , not decided on which connectors i will use for the leadscrews yet.:)
Power supply collected , steel rod and trapezoidal screw collected from a local source - way cheaper than marchant dice.Ballscrew nut ordered for testing.
Thinking about changing the design to...
Ok - power supply at the post office waiting for collection , rail supports ordered , couplers ordered , carbon steel rods ordered - getting there slowly.
Just linear bearings , drive nuts , bearing...
Hi
I was looking at the same stuff and had a chat with one of the other guys on the forum who does not live too far away from me - He mentioned that the TB6560 stuff was not very reliable and...
Looking very solid - Just had a look at that site - Love the animation - gives me some ideas for my build.
http://serve1.darktech.org/cnc/2M535kit.jpg
Specification
2M535 Drive controller:
2M535 subdivision-type two-phase hybrid stepping motor drive using DC 12 ~ 36V power supply, suitable for...
Hi Guys
After a couple of attempts of machine building , suffering 1 workshop build where my work got trashed , subsequently moving to a new workshop which suffered with slight damp and thus...
Lots of good videos on how it is done on youtube .
I have had a few items done , pretty good job.:cheers:
Hi
I have just got the same equipment apart from the psu - can you show your wiring in more detail please - could not find a proper wiring diagram for the bob to the driver boards. - I know a bit...
Hi Guys
My machine partly disassembled has been moved from workshop to workshop and has got a little rusty is currently sitting in my workshop not being used as I need something a bit bigger.So...
Ok guy's
I recently moved house and took my cnc machine to a new workshop - I don't know how it happened (no one admits anything) but my machine is now out of aligment - so is it possible to get...
Here is a question for those of you in the UK.
I have the option of buying a part built machine a table router that is capable of cutting anything up to full size sheets of mdf/ply or 8 x 4 foot....
Looking to buy or have someone make me a mount for a trend router
Regards
Tony
Hi when you teach yourself you get to a point where you cant get any better without structured help.Trust me been there - got the help, now I am semi pro as a musician and make guitars/flightcases...
Just curious can you turn a pillar drill into a mill thus making it more useful in the workshop.If you can is there a thread fior this somewhere?
Hi
Yes I understand what you mean - will look for the book as a good starting point - however I would not know which to buy (only have a small budget for this as well)
Regards
Tony
Hi Hemsworth (I worked out where you are )
I do indeed supply parts for mking guitars - get lots of second hand bits too.
I also can supply the wood for you to make your own eg nice pieces of...