I have a fixture with 5 identical stations offset by 2.000" with a common pick up point.
In the program I have station 1 = G561, 2 = G562... 5 =G565 so I can fine tune each station independently. I...
Type: Posts; User: nduerr
I have a fixture with 5 identical stations offset by 2.000" with a common pick up point.
In the program I have station 1 = G561, 2 = G562... 5 =G565 so I can fine tune each station independently. I...
One of my last issues for this machine is to get the IBAG HF80A-40 spindle running. The issue I am having is when I start the spindle the (PTI Model 1340-BOT-105) Allen-Bradley solid state...
So I got the IO issue figured out. I had changed the cmos battery and that reset the bios settings. I found a setting in the bios that forced the ISA Bus to use IRQ 10. Its been working good since.
I came across a deal on a 1989 Bostomatic 400-3 with 2 spindles & 4 axes this past fall. It was converted to PC controls MDSI's OpenCNC in 2004. I got it powered up and got the PC running, but I am...
Everything measured the correct voltage after the wiring change. I am ready to start up the machine.
Thanks again Jim.
That looks like a winner to me. I will give it a try this weekend. I was wondering what the 02-5TB on the diagram was, I will have to go back and look at the other transformers to see if I should...
I came across a deal on a 1989 Bostomatic 400-3 with 2 spindles & 4 axes this past fall. It was converted to PC controls in 2004 so I hope It will start up and work! I have it all setup and...