That is what I think also. When I was playing with the offsets I'm sure it saved a Z position that is giving me fits. For the last three years I have moved the spindle to the datum position, after...
Type: Posts; User: turosan
That is what I think also. When I was playing with the offsets I'm sure it saved a Z position that is giving me fits. For the last three years I have moved the spindle to the datum position, after...
When working when the mill touches the probe it "retracts" (bounces) back up a short distance, instead it crashes into the touch probe so I e stop it. It started doing it some of the time when I...
Is a round aluminum plate with wires screw into the bottom through a hole on the side. It plugs into a port on one of the gantry uprights. Similar to the Axiom touch probe. None of the wires seem...
Thanks Andrew, Pardon me for being a rookie, but which switch, and how do you get it to work? I can home all right.
I have had UCCNC (AXBB-E) for several years with no problems at all. The last week or so when I press the touch probe button to zero the Z on the touch probe the spindle/bit does not stop and bounce...
Thanks, never new that. Will try.
- - - Updated - - -
Thanks, never new that. Will try
220V, 2.2kw, 24,000rpm, water cooled, er20 collet.
I bought a new spindle because the old one has bearing problems. New one works great except for the fact that the collet gets stuck in the spindle after every use. It doesn't matter if I use the...
I am running my machine (custom built) with UCCNC and the AXBB controller. If I bought a new spindle (different manufacturer), same specs, would it be just plug and play or what configurations would...
Thanks, I thought that might be the case, but wasn't sure. How do you tell if a spindle is correctly grounded?
I am currently running my spindle through a VFD. If I get another spindle, different brand but same specs, is it just plug and play, or is there anything I need to change or look at?
I am looking to upgrade to Aspire (I have vcarve pro). My question is, is it the best product out there for the price????? Should I be looking at something else?
There are a lot of free versions of ArtCAm on the web. Is it worth it getting one since it is no longer made or supported? How does it compare to Aspire and is it best to just go with Aspire?
he1957, I would buy in an instant if they offered UCCNC with the axiom here in the USA. But Axiom USA refuses to even consider UCCNC. That stinks and their loss.
Would like to know what machines you recommend in a small format (2 x 4 or thereabouts) cnc router?
Anyone find the 5 inch z axis on the Sabre 23 limiting???
Does anyone have anything, good or bad, to say about Axiom cnc router machines?
Basically does anyone have experience that can compare the Stepcraft Q series to the Axiom Pro+ series. I am torn between the two.