I am planning to control my circular saw grinder, 3 axes, with Mach3.
Any idea or experience would be appreciated.
Can
Type: Posts; User: agelkom
I am planning to control my circular saw grinder, 3 axes, with Mach3.
Any idea or experience would be appreciated.
Can
Hello,
Please visit CNC4PC web page for Capacitive Sensor
https://www.cnc4pc.com/non-contact-height-sensor-for-plasma-and-oxy-fuel-cutter.html
Cap04 is easy to implement and use,
Best regards,...
USB interface card has a delay for THC controlling.
You can use Cap04 with CapStp11 for Stand Alone THC.
http://www.agelkom.com.tr/stepper_motor_interface.htm
You can use Cap04 with your existing red display THC.
http://www.agelkom.com.tr/prod031.htm
Or Stand Alone THC with CapStp11
http://www.agelkom.com.tr/stepper_motor_interface.htm
You can use Cap04 and CapStp11 for stand alone type THC.
http://www.agelkom.com.tr/stepper_motor_interface.htm
Okay,
Without plasma generator connection
1. Assume that AVHC is good, display can able to show between say 100 to 200 or more at SET mode (adjustment with SET VOLTS potentiometer)
2. And if...
Vertical mounting works naturally, but we saw that vertical assembly did not work as expected in our experiments, torch nozzle was a little crushed. We had to experiment more to optimize, then we...
Hello,
You can also look our page at AGELKOM News Page for TORCH PROTECTOR. Vertical mount is not worked properly.
I think , I can help you. But first are you sure your red display unit is okay, I mean it must show 0 volts when power is on, without plas connecton of course.
I have such unit about 12 years ago....
I need information about the attached pictures, ISA board.
This card is using in Laser Cutter which produced by Prima / Italy
You are welcome,
You can use Cap04 capacitive sensor for non-touch operation. Therefore your Z axis motor does not push the working plate.
Best regards,
Hi,
Send your mail to [email protected]. I will send some photos and info.
Hello,
I think I can help you, we have a product to connect with Red Display Torchmate THC. Please visit Torchmate Applications
First please let me know if your Up-Down switch is okay,.and Red...
Hello Steven,
You can find the solution for Torchmate's (Red Display) THC:
...
Yes, absolutely you need, because we produce THC :-) visit our we page Capacitive Sensor
If you dont want to use THC you must protect your torch with magnetic breakaway, AGELKOM News Page
Best...
Hello,
Please visit our web page Capacitive Sensor,
You may need THC for your Plasma and Oxy Cutter.
Please feel free if you have any question.
Best regards,
Argun Gucdemir
Agelkom Ltd
Hello,
Please visit our web page Capacitive Sensor
Cap04 is easy to implement and use, please feel free if you have any question.
Best regards,
Argun Gucdemir
Agelkom Ltd
Hello,
Please look our web page Capacitive Sensor. Let me know if you have any question.
Best regards,
Argun Gucdemir
Hi,
You can build your torch protector, visit our web page AGELKOM News Page for magnetic breakaway
Regards,
Can
Hi Steve,
Yes, it works for both. Please look
Capacitive Sensor and view Edge Cutting Test video
Best regards,
Can
Hello Steve,
Agelkom's (@cnc4c) capacitive height controller is suitable for your application.
Also Techserv (in UK) use this sensor for their multi head flame cutters.
Pictures attached.
Best...
Hi,
Look :: CNC4PC :: iNtRo for THC.
It is low cost and easy to operate
1. Yes it is possible with their H-Bridge
2. In Mach3, ArcOk signal is an input and it needs to move. ArcOk signal comes...
Hi Dan,
Look :: CNC4PC :: iNtRo for THC. It is very easy to use, "Cold Test" is possibble There is no need the Z value for cutting height, sensor finds the correct height and it follows the sheet...
Hi,
According to your pdf these wires connect to your stepper driver:
Black to A+
Green to A-
Red to B+
Blue to B-
Can
Look :: CNC4PC :: iNtRo for Capacitive Height Controller solve your problem,
torch never dives with it. Also it can be used with your THC or as a THC for plasma and oxy.
Can
Go :: CNC4PC :: iNtRo and look Capacitive Height Controller.
It detects the height without cutting voltage and keep it constant, whatever your cutting speed.
Regards
Can
Hi.
Visit :: CNC4PC :: iNtRo for capacitive torch height controller.
It never touch the plate for IHS, it can be use with your voltage based THC also.
Air pressure fluctuation during the cut will...
Hi,
If you have height control problems with thin metal cutting, floating head not solve your problem. Please visit our web page at Cap01PWM
Torch head under floating head control, touch the cut...
I am using the same pic, and I have same problem Please let me know if you solve yours regarding the circular interpolation. I am using line segments for curves but it is not as smooth and fast as I...
One of our customer try our Capacitive Sensor for bevel cutting. Sensor ring is prependicular to working plate. Please visit our web page http://www.agelkom.com.tr/prod02.htm
Regards,
Cem