Good point on the tooth count, also consider using the smallest diameter
blade that will cut thru the material as the smaller dia. results in lower surface speed of the blade and that will reduce...
Type: Posts; User: bandk
Good point on the tooth count, also consider using the smallest diameter
blade that will cut thru the material as the smaller dia. results in lower surface speed of the blade and that will reduce...
I saw delrin regularly with a combination 8-12 tooth blade on a 7x12
cutoff saw , also with a 6tpi blade on a vertical . blade speed is the key
with plastics.
Trade ? vocational school is the best start. But if yo can find a small shop owner operated , you could train there for cheap ( I started at min wage) after voc school
Hello to all , this is my first post , I have a acu-rite millpwr 3 AXIS
on a Jet knee mill . the problem is one of the servos has a short that
trips the breaker . I am getting no support from the...