What procedure are you using and where did you get it. Please send me your email address as I may have information for you to try.
Type: Posts; User: jp41558
What procedure are you using and where did you get it. Please send me your email address as I may have information for you to try.
Both codrex and Cabron, Have you gotten the problems fixed? Did you get the home procedures? If not please let me know
The alarm
T10 Fin wait 0080
is a normal wait condition that should not be a factor at this time,
the alarm
Z70 ABS.ILLEGAL 0101 X
is telling you that the X axis home position has...
As this post is dated back in June I am assuming you have the problem resolved but wanted to check. If the machine was powered down with the arm up the "arm up" memory data bit will be in the...
Can you send me the machine serial number and manufacturing date? I may be able to get them for you.
Depending on which hand book you are looking for I may be able to help. Operation manual, electrical manual, Ladder manual? Also if you send the machine serial number i may be able to get the...
Thanks for the feedback. Yes, PCMAX was able to take a Hurco conversational program and convert it to an NC program. That made it very nice to be able to move it to another machine if needed. That is...
Halem,
You are touching on a topic that may be close to a thread I am currently looking for help on. I worked in a shop with a lot of OLD Hurco machines, Max 2 and 3's. While there i did a lot of...
Are you still having this problem? Do you get any alarm number prior to the message.....ie EXnnnn code before the message?
Are you still having problems with this or have you gotten it resolved? What is the machine model and serial number?
file sent. Hopefully this will help.
Did you ever get the parameters? Do you have the serial number off your machine?
I have an electrical diagram for an SL-35 M with an MF-T4 control if that would help. Do you know the ladder number for your machine?
Hello all,
I used to work at a shop with several old Hurco Max 2 and Max 3 machines. I did a lot of the programming on those machines offline using a desktop and running PCMax. They recently...
We have many Max 2 and Max 3 machines that we work between. I have had the chance to download programs from the Max 3 run them thru HD3 Serialize and upload to the Max 2 machines. This process works...
Makino Pro 3 on top of a Fanuc 16i
We are in need of a little help with our Makino A77. We just received 2 in from a sister plant and are trying to install Renishaw probes on them. One came in factory installed and the second we...
Was the machine powered down over the weekend. There is a very good chance that if it was and if the battery alarm has been on that long and the batteries have not been changed that you have lost the...
Thanks, I appreciate it. I will also check out Tech Equipment. I think they have been in on other projects here in the past.
Right now we are working on a Mori DuriVertical with a Fanuc 0i control. I can upload and download the ladder but the onboard edit functions do not become active. I have a Mighty Viper mill that I...
I don't know if this has come up before or not, but several times a year we have to do special interfacing between our machines and external devices. Our older machines were able to do onboard ladder...
I may have a procedure that will work for this, PM me and I will see what I have
Thanks for the information. That helps greatly.
Hello everyone, I have an older BMC50 (one of the blue Max 3 386 platform models) and the counter weight chain has stretched some over the years. As it makes a long Z stroke and the head gets
close...
We have a DMG DMU 80 with a Hoffman 4th axis. We are getting a A74 axis encoder input alarm. We are thinking that the rotary scale on the Hoffman indexer is bad. If it is we are looking at having to...
Richard,
Thanks, I have heard that you can replace the hard drive with a flash drive but I have never done this so I am not sure of how it is done. We have both the 386 and 486 platforms of...
I don't know if you have figured it out yet or not, but it sounds like your problem is that you are set up for a 10 M-code output. The machine only has 5 outputs it can use so when it is set for the...
will do, thanks again.
Brock,
Thanks for the advise. I have gone over the procedure and notice it needs to use the HD3 Serialize utility. I tried to find this on the FAQ site with no luck. Do you have any suggestions as...
Does anybody have any idea on how to use an X address input and monitor and write it into a #variable on a Fanuc control. We have a NL with a Mits contol that we use a switch tied into an extra X...