Does any one have an example of a macro program that use variables to engrave s/n on a part.
Type: Posts; User: CLATHAM
Does any one have an example of a macro program that use variables to engrave s/n on a part.
We have a FA20s i am getting same alarm. I have taken all the covers off, none of my 5 switches are hitting. All wires look good back to electrical cabinet. Any suggestion.
I am schedule to go to the best of walter class next week. Has anyone been. Trying to find out what to I might be getting into. Really believe it may been a waste of my time. just trying to get a...
Does anyone have a gibbs cam post for a Quick Turn Nexus 250- II
We have a mazak mill nexus 510c with a matrix controler we have had it for about five years and just got a mazak lathe qtn 250 my with a matrix controler. we have all ways had problem out of or mill...
We just got a mazak quick turn nexus 250-II my with live tooling. We have been program everything on it with mazatrol we have a part with a slot cut thru it. I can post it out for or mazak mills, but...
thanks but done a little more research and found that i need to slow down feedrate on 1st skim and increase my voltage gap to cut more material out of middle of part. I am now able to hold with in...
Can anyone tell me if there is a G-code to pick an edge of part up and set a zero and machine from there. For Mitsubishi FA WEDM. I have one for hole use a lot thought there was probley one for edge...
trying to machine a hole with +/- .001 around 11.700 long. having trouble with it being to big at top and bottom for the first .5 to 1.0 deep. tried more spring passes and adjusting wire tension and...
Yes cable worked with enetdnc. Not sure what you are talking about we you asked if the TX is connected to the RX. I was told they used onecnc and this data switch about 8 to 10 years ago to send...
Yes, we used same cable from before and we tried a cable off a printer as well. So we wasn't sure if it was the software that we downloaded (for free) or if it was something we was doing wrong with...
No alarms or feedback on machine or computer. We are trying to use a data switch that we used several years ago.
We were using ENETDNC till our local computer guy tried to set us up on wireless...
TRYING TO SEND PROGRAM FROM COMPUTER TO A HYUNDAI LATHE WITH A SIEMANS CONTROLER USING RS232 CABLE. WE DOWN LOAD SOFTWARE FROM ONECNC CALLED NC LINK. WE CAN'T GET IT TO SEND PROGRAM TO THE LATHE. WE...
NOT SURE ABOUT YOUR MACHINE, BUT WE HAVE TWO FA MITSUBISHI WIRE EDM. WHEN WE BOUGHT OUR WE HAD A WHOLE BUNCH OF 3 1/2 FLOPPY WITH OUR. I AM PRETTY SURE THAT FACTORY SETTING PARAMETERS IS IN THAT...
WE HAVE A MITSUBISHI FA 10 WIRE EDM.
I KEEPING GETTING THIS ALARM WHEN IT CUT THE WIRE. 830 CUT WIRE REMAINING. I CAN HIT START AND IT WILL FEED AND TAKE OFF RUNNING TILL IT CUTS THE WIRE AGAIN. I...
THANKS FOR ALL THE HELP. HAVE HAD ALOT OF HELP WITH THIS FORUM NOW AND IN THE PAST
WILL I NEED TO HAVE MACHINE TURN ON OR OFF TO REPLACE BATTERY
THANKS FOR THE HELP TALKED WITH MAZAK LATE YESTERDAY AND THEY TOLD ME THE SAME THING.
I DIDN'T UNDERSTAND THEM CLEARLY BUT THINK THEY SAID WILL HAVE TO RESET MY HOME. IS THAT CORRET?
GONING TO WAIT...
NOT SURE IF THIS IS WHAT YOU WANT
YZ= F3 9F F2
ATC = AL 01 N1 01 ( I BELIVE IT IS A "N" IT LOOKS LIKE UPSIDE DOWN U)
MAG= AL 01 N1 01
started machine up this morning and had a few different alarms first 2 was,
10 detector malfunction
2 emergency stop
hit reset and got
72 servo warning
82spindle warning
power off and...
will this load programs any faster.
I all so wanted to make sure that it was a different manual for inspection plus and and not in the middle of a different manual.
I was told we have inspection plus on our newest machine(mazak nexus 510c-II ). I see were we have about 42 programs in the 9000 range. I dont have a manual on inspection plus. Is there a soft key...
we use 17-4 about 75% of the time. we only use carbide drills. depending on the size of the hole to how deep. for little holes we use nachi drill. for deep hole we use walter or mitsubishi drill....
we have gibbs cam.
I cant zoom in to tell what you are really talking about.
my sugestion at this time is to post your problem at GibbsCAM Support Forums - Powered by vBulletin
there a lot of...
got it to work. not the way i would like to do it but gets the job done.
having to do all in mazatrol and using letter offset insteed of g54,g55,or so on.
WE DONT HAVE INSPECTION PLUS.
I TALKED WITH A GUY FROM MAZAK THIS MORNING AND HE SAID WE COULD USE XYthCNR PICK UP. HE WAS GOING TO PLAY WITH IT ON THERE MACHINE TO FIGURE OUT HOW TO DO IT. STILL...
THE BLOCKS ARE WELD ON NOW THE BOSS WANTS TO PICK UP EVER BLOCK AND CUT WELD SMOOTH. JUST STAYING OFF THE BLOCK .001 TO .003. THEY HAVE .05 TOLARANCE ON LOCATION. SO THEY ARE ALL OVER THE PLACE.
I AM TRYNG TO SET A PLANE ON A BLOCK THAT IS KICKED ON A ANGLE. GOT A BUNCH TO DO WITH DIFFERENT ANGLES. HAVE A MAZAK 510C. TRYING TO PROBE THE BLOCK, BUT CAN'T FIGURE IT OUT. SEEN IT DONE ABOUT 8...