Search:

Really struggling to connect a laptop with a Tnc 640.
Lan cable straight from laptop to the machine and no matter what ip address I use it just won’t connect.
Is there any setting that need...

yes you were correct it was just my typo

thanks for the rotation setting though $P_UIFR[2,Z,RT]= < Your R-Value >[/QUOTE]

managed to get this working how i wanted

when i moved to postion in G54 i then swapped to G55 and ran this line which read in the machine postion
G55 would look like:
...

So to clarify I want my main program to use G54 to go to position then set G55 to X0 Y0 Z25 then call a sub program that uses G55.
The reason being if the job needs stopping to run another job or...

I have a multi part fixture which holds 60 parts.
This fixture goes on the machine daily to machine parts over night.
I want to be able to put the fixture on and probe align the fixture in G54...

thanks to james a rather cost effective fix was resolved.
much cheaper than mikrons fix.

thanks again james

The keyboard itself is bonded to a piece of aluminium. Not sure if membrane is the correct description of this board. There is a spare button. As heidenhein UK weren't really forthcoming with...

we have a mikron vcp 600 cnc with the heidenhein iTNC530 controller.
the keyboard has a membrane type keyboard and the program load buttton haas now failed, this is ok in the program/ editing mode...

I presume your dealing with Sodick uk. I had the same problem with a similar issue on the u axis. The drives are made by Panasonic but in the uk Panasonic didn't want to touch it because their...

i have a orbicut head and controller removed from a hurco 425 for sale also a modified head that rotates electrode with a rotary pulse. basically a c axis.
[email protected] for more info. loads of...

I am having complete nightmare issues with tool libraries sticking since upgrading to x6. But that is another story. It did lead me to search in the operation configurations and try and edit those. I...

I am having complete nightmare issues with tool libraries sticking since upgrading to x6. But that is another story. It did lead me to search in the operation configurations and try and edit those. I...

We work with solids too and sometimes need to add surface on different layers so you can switch them on and off for different machining strategies. The way to do it is when selecting the entities to...

Lol. I'm new to mastercam with a forced job change. Which I must say is for the better. But I've not found mastercam very intuitive either. It certainly lacks solids machining compared to other...

we have a sodick A320D with EX21 controller. the U servo drive has failed causing the heat switch alarm to come up.
i have swapped the U and the V drives over to eliminate any motor or supply board...

for small pin holes, we generally use 1.0 or 1.5mm we just pilot dia 1.0mm all way thro and then wire cut the holes. since doing this 90% of all pin breakages resolved. and i've not had a pin seize...