Hello TopSolid community
Has anybody tried to integrate a the measurement of a work piece into a CAM program?
On Heidenhain there are clock cycles with which you can measure a drill for example,...
Type: Posts; User: Silvio
Hello TopSolid community
Has anybody tried to integrate a the measurement of a work piece into a CAM program?
On Heidenhain there are clock cycles with which you can measure a drill for example,...
Hello Mulder
I work with TopTool parameter tools as well as those ones where you need to deposit a TopSolid drawing.
I take the raw part with ‘positioning/coordinate system ’ into CAM from a...
Hello,
I have another bigger aluminium cast piece for 5 axle processing.
IFor this process, I use a clamping device that was created in Topsolid.
When I run the simulation with ‘raw part...
Hello Donnerkeil
A ‚backplot’ is not possible with TopSolidCAM as only the CAM files gets simulated.
There is a software (CIMCO Edit) that shows NC codes as a §D simulation. That however only the...
Hello,
we use the ''Space-Pilot'' as 3D mouse for TopSolid.
This is a very helpful tool for rotation of the objects.
But sometimes we got the problem, that the ''Space-Pilot'' goes back to the...
Hello Teufelsfräser,
one alternative might be to build with ''Curve at angle > angle path" a guideline.
Than ''deburring'' it
and milling it with bypass.
Greets, Silvio