Hallo,
have you solved the problem, and what was the reason for alarm 55?
best regards
mazak-user
Type: Posts; User: mazak-user
Hallo,
have you solved the problem, and what was the reason for alarm 55?
best regards
mazak-user
Hallo,
You have only a problem with Your parameters for the chuck.
Look at Your electric cirkuit book and You will find on the first 15 sites R-PARAMETER.
Set the parameter for Your chuck and...
I will do my best!
You must get help, because this machine must be programmed in Mazatrol if You will work effektive.
I will look for a programming book in english. Please look for somebody near to You for 4 - 5 hours...
did you have experience with any Mazatrol?
Mazatrol T32-2 or T-3 ?
How do You change from german to english ?
179410
Hallo,
what type is Your machine. Have You Mazatrol?
Hallo,
please post a picture of the monitor, with errors.
[email protected]
Hi,
I have the same problem on my H-415 with M+.
Can You help me.
Best regards
mazak-user
Hallo,
I think Your power supply für 24V is not working. Please open the electric cabinet and make some pictures of the parts in it, and then I can tell You what You can check.
b.r.
mazak-user
Hi,
can You post a picture, when the machine is power on.
br.
mazak-user
Hi,
I look for a controller : MDS-B-V2-3535
best regards
mazak-user
So enter the existing value with the existing difference for -2021000 which would be: -2,021000
And press INPUT ?!
Then the system corrects the value...
Regards
Mazak user
Hello Alesi
Can you explain the value that you have to enter without comma with a short example please?
Many thanks in advance
I don’t want to do a mistake, that’s why I ask again.
Regards
Hello Alesi
Thank you for the quick answer.
Regards
Mazak user
Hello everybody HCN6800 with Mazak controller.
Now I have discovered that the tools, which are measured with their tool length units, are not correct anymore. The discrepancy is about 2,05mm. We...
Sorry but you can’t simply switch off the system. Get a new battery from Mazak and simply switch it with the old one.
It’s weird though that the machine doesn’t work anymore at all.
Usually that...
Hello gusto, thanks for your prompt answer
best regards
mazak-user
Has anybody got experience with programming EIA/ISO on Mazak control systems?
We were supposed to build a program in EIA/ISO and thereby bring the next tools respectively into WZ change , even...
Hallo!
Sorry no.
best regards
mazak-user
Hi,
look at this pdf.
best regards
mazak-user