I would be interested too, if still available... Thanks.
Type: Posts; User: trubleshtr
I would be interested too, if still available... Thanks.
Do you have other things running in the background on your computer?
anti virus programs, updates/auto saving features ect..
Hey look at that, good job! Thanks for posting your results.
So in the end it was a new drive set-up and a new BOB?...I suspect your old drives were damaged?
Ahh finally someone with some electronic background....thank you Tom.
Hi Corrie,
I would unplug the break out board from the pc so you know that no step and direction signal is being sent to the drives. Turn your power supply on. If the axes start creeping, measure...
Interesting, I've never worked on a Hurco, the proxy makes perfect sense if it is not picking up pulse's while you are spinning at low rpm... Is there an encoder on the motor also then?
Well, something in the way of power has to be coming down the line to the motors to make them move.
If you know how...?With a volt meter on the motor connector, measure what you are getting when it...
Sounds like the bearings are damaged in the spindle Or in the drive motor.
Did the motor shaft turn smoothly in your hand when you had it off the machine? and what about the spindle with no motor...
Hi Corrie,
I had a quick look at the link you provided. I dont see any provisions for gain/voltage adjustments on these drives. He does however have a jumper to limit/set the amount of...
I don't know how safe your set-up is...But If you power up the machine only, no computer ,no Mach , does it still do it? (Dont attempt if you know the machine will run away uncontrollable with no...
Is the acme rod "fixed" at both ends... if so undoe one end and let it float. You should be ok Providing you have precision alignment on your "rails" and between your 2 rails.
You might want to...
Hmm and thisis only at start up you say...I thought maybe you need to tune the drives/adjust any gains going to the axis...but if it is only at start up????
Is it possible you are picking up some...
Are they trying to find home position or locate the marker pulse on the encoder of the axis?
what type of machine/controls?
Voltage imbalance from the RPC?
LOL....I had to diss-assembly mine completely to get it in the basement. Now if I can only get the old lathe from the shed down there too....:violin:
Hi Frank,
Have you tried "youtube" for video's...might get you thinking if you are a visual learner?
Here is one link that maybe of help?...
Hi guys ,
I am a licensed Millwright with extensive electrical and controls experience..PLC's robots cnc ect..... I work fulltime, but have my own service company on the side. If I can be of any...
Or Challenger Mech-Tech in Georgetown?
Hi Black beard, It does sound too good to be true and you know what they say about that....but the concept of burning hydrogen seems plausible,
I looked on youtube and came across a couple of...
Hi anyone here done a water conversion to their car?
I am looking for feedback good/bad....
There are many people selling kits to add in an HHO system on top of a gas system...just wondering if...
Any luck getting your system up and running yet?
can you turn the ball screw by hand to brinf it off the switch? Can you unmount the switch and then jog carefully the correct direction away and then replace the switch?
I am sure there is a way to...
Your macine might be moving a little a power up/down.
After power up, home machine, then set-up your part zero position and zero out your DRO. should be good to go.
If problem arises during...
MY BAD..
Say hi to Nessy for me.......
Click on the link he provided, It should open up as a PDF file, them save it to your computer.
Hello all, I'm out in the Halton, Ontario area.
Industrial Millwright/controlls tech. by day, father/husband and then cnc hobbiest by night..... Currently building a small cnc, only taking 2 years...
We ran Doosan cnc's for 7 years, no problems, regular maintenace kept them happy.
We installed filters on all our machines, the electricity in our area is "dirty" and on a hot day when everyone/thing is demanding power from the grid we use to see wild fluctuations in the incoming...
Serviceman has a good point.... Check the regen circuit, the poor machine might not be able to dissapait (sp?) excessive power in the system when you ask it to quickley stop....Deffinetly check the...
Ok I'll admit I don't know much about how web sites are made, but, I want to set-up a web page for my business, and thought I would ask around if any of these "free" web pages advertised are worth...