Search:

Any news to this problem?
I think the problem is with the drivers as the one board is from a customer, one board is new and one board is out of a cupboard.
I have tried RDWorksV8.01.18 and...

Like I said you will have to test the belt first by removing the motor connnector from the driver board and see if the belt jumps teeth when moving the laser head by hand.
The open end belts have a...

HI Guus46a
If the circle is open on the left ir right wile still lying on the worksbed then the proglem is with the X-rail.
If the circle is opening is on the top or bottom , your problem is with...

It looks like a problem with the X-axis only as this is where most of your wearing take place. Timing belts do stretch and this cause vibration as the belt teeth does not line up with the pulley's...

You will have to correct the nozzle aliment so that the beam move straight down the center of the tube and hit the center of the lens otherwise the deflection through the lens will cause the beam to...

If you get enough power in any area of your bed to cut through your laser tube should be OK. Although you will loose power over long distances this will not be the case as your machine is fairly...

Misalignment where the beam cumming from the bottom of the nozzle is skew. But I think your problem is a loose mirror or lens.
The second reason is bad alignment of the beam especially if the beam...

The first filter I used was a cheap paper filter to remove most of the bigger smoke particles(90-92% efficiency). Secondly I used a bag filter to remove most of the remaining smoke(95% efficiency)....

Hi Indyglassman. I need to apologize to everyone on this thread as well as Boss engravers. I did not visit Boss engravers and was confuse with Gboss who I did visit.
Sometimes I don't read the...

Most paper filters is not washable and trying to remove the nicotine from the filters can be a bit difficult. Using a primary cheap paper filter definitely will help with preventing it from getting...

What sort of features would you like in the software?

I would really suggest replacing the controller with a RDCam controller with a system which is proven to work. The latest version RDCAM6 will run from Windows8 and CorelDraw X6 . Cutting straight...

RDCam is your best option. Their website address is http://en.rd-acs.com but their controllers is available from many other websites at cheaper prices. The software will be able to change your raster...

Is the machine locking up in the X or Y-axis? Anything on the display or does the display go blank or does the machine reboot?
X-axis is normally a moving home sensor and the wires can break.
Look...

The one reason could be air flow from the nozzle especial if there is no airflow through the cut. That is the reason of some smoke at the start of a cut.
The second reason is bad alignment of the...

I as at their factory a few months ago and was not very impressed. Quality control was not great and their machine designs could be better.
I would suggest that any buyer get as many pictures before...

I have laser cut a filter box last year for one of my customers. The file is downloadable from the website.215024

The serial no:L200-1699
Control:Fanuc series 21i-T

Hope this will help.

I just bought a lynx 200l on auction and need a operators manual. Please can somebody help.