Search:

.....finally!
turns out input 29 was at fault. a local guy came in and found it.(wiring is identical to the tnc370 but without the sr1/sr2 safety relays )
changed the input to 27 and changed the...

....swapping out components.
the 2500c is a 'bridgeport' version of the 360 tnc.no support from heidenhain as it was the machine builders custom setup.essentially it is a 360 and the wiring from a...

hi all,
i am at my wits end with this machine.
i am getting a 'y axis drive fault' coming up on my control.
i power on and the memory check completes,then when i press power enable the fault...

....but hoping someone can help on an old machine!
i have a series 2 interact 4 with tnc2500 control and maestro drives with air drawbar.does anyone have parameters for that??

ROB

......finally!
turns out i was 99% there...just needed to put a hex value of 21 instead of 20 and it all worked.
i knew it would be something simple.....hoped more like.now the machine is sold...

....this is my biggest problem!
have been talking to a hardinge engineer today and he is faxing me some various diagrams for the uk spec mc's
he cant understand why i have 3position key switch...

....is in estop as it is looking for the door guards.however,this machine has no socket fitted to the cabinet for that.so what i need to know is; where does the original guard port plug in,so i can...

....../any ideas???
:confused:

i have a selection of eztrak parts and i have managed to 'sling' a machine together!
i have gotten to a point where i am going crazy,over something that i hope is simple.
the mc loads from the...

....on getting the machine to be in the 'ready' state.
when the hard drive is booting/reading the green led inside the panel is working.although the hdd light on the front panel is not working.
...

.....well,last minute madness,and i got it to work!
what i did was; install a full version of windows 2000 pro,then i copied as much as possible from the corrupt disk.making a note of files that...

....is not from mazak.i intended to use a 2.5" drive i had laying around.
the machine exactly is a 250MSY (nexus),mazatrol 640T.
it was working before it came to my place....but its been off for a...

....for your reply.
i have done the setting to '7' thing but it made no difference.
what i am going to do next is....wait for an engineer 'who knows more' tomorrow!
i hate to concede,so i am...

....i managed to get a usb caddy for the hdd from the machine and i checked it on my laptop.i copied everything from that disk to a folder for safe keeping.i had real trouble copying the WINNT...

i powered up our nexus 250msy today,and all i get is a teal screen with the mouse pointer on it. the same 'ps' alarm light on it too.it loads the windows 2000 stuff then it just does not boot into...