Search:

I ended up swapping X and Y drivers and the problem followed to the Y axis. I swapped back and cycled all of the dip switches on the X axis and the problem has dissapeared. Thanks for your help!

Yep Tauranga here.

I tried our second machine today and same story, hasn't been opened in a year or so and no settings changed, and X axis is slow.

Must mean there is something wrong with the...

I tried adding G50 to the init string in Mach3 which produced no change. I haven't been able to find anywhere else I'd be adding a G51 code, as I said I have no Gcode loaded and I can't find anywhere...

Hi Craig,

I wouldn't even know how to set that up so unless I've done it by accident, no.

The machine is producing this problem without any G code loaded in mach.

I.e. If I zero X, Y, and Z...

Hi guys,

We have a little 600x900 hobby CNC machine, have run it several hundred hours no troubles over past 4 years. It has probably not been used a year but I have blown the dust off it and gone...

Hi all,

My partner is producing a product that has alphabet pockets in a piece of wood, to a high enough detail that a 3mm end mill is necessary but sometimes large enough that a 6 or even 8mm end...