I’ve been running some tests on 3/4” plywood with a 5” slitting saw.
I’ve been getting a lot of smoking when removing a small amount of material (around 1/16”) from the outside diameter of a...
Type: Posts; User: Hardwoodcnc
I’ve been running some tests on 3/4” plywood with a 5” slitting saw.
I’ve been getting a lot of smoking when removing a small amount of material (around 1/16”) from the outside diameter of a...
I’ve been running some tests on 3/4” plywood with a 5” slitting saw.
I’ve been getting a lot of smoking when removing a small amount of material (around 1/16”) from the outside diameter of a...
The specs on my cutter are;
"3500-4300 rpm at a feed of 20""-100"" per minute for your application."
I ran some tests:
4300 at 100 feed rate and 10,000 sfm Result: smoking when making a cut...
The specs on my cutter are;
"3500-4300 rpm at a feed of 20""-100"" per minute."
I ran some tests:
4300 at 100 feed rate and 10,000 sfm Result: smoking when making a cut
3500 at 100 feed rate...
The specs on my cutter are;
"3500-4300 rpm at a feed of 20""-100"" per minute for your application."
I ran some tests:
4300 at 100 feed rate and 10,000 sfm Result: smoking when making a cut ...
I’ve been running some tests on 3/4” plywood with a 5” slitting saw.
I’ve been getting a lot of smoking when removing a small amount of material (around 1/16”) from the outside diameter of a...
I’ve been running some tests on 3/4” plywood with a 5” slitting saw.
I’ve been getting a lot of smoking when removing a small amount of material (around 1/16”) from the outside diameter of a...