I am looking for a long turning machine.
Here are my expectations:
- Small number of pieces : maximal 50 work pieces
- Diameter until 25mm desired, otherwise 20 would be acceptable
- Length...
Type: Posts; User: Scootworks
I am looking for a long turning machine.
Here are my expectations:
- Small number of pieces : maximal 50 work pieces
- Diameter until 25mm desired, otherwise 20 would be acceptable
- Length...
Hello everybody I am looking for a small, cheap CNC machine that allows me to turn cylindrical pins. However they are not only cylindrical and flat- they also have a centering device in the middle....
You could try to change the G0 sets to G1 and control the feed F2 over the parameter like the feeds from g1 f2 over the parameter. Then you also have more flexibility if you need to adjust anything....
F2 chokes G1 like G0
I’d like to add something else… Probably, it also can be made with scaling. But I think the solution above is a better one.
Well… I’m not really familiar with this topic but there’s a possibility that I would take into account…
(Input elements)
E50=70 (diameter at the top)
E60=67.44 (diameter at the bottom)
E70=77...
Thanks for the reply.
It’s 789 again. Where exactly does it have to be entered?
Hello
I believe I searched through the whole controller for a possibility to set time. But I didn’t find anything. Could anybody help me?
Hello everybody
Could anyone give me a download of the controller heidenhain itnc 530 that works under vista?
Thanks in advance