in MC 2022 and 2023 use Advance drill . you can control every part of the motion.
Type: Posts; User: cadcam
in MC 2022 and 2023 use Advance drill . you can control every part of the motion.
you cannot do tabs while using the slot mill option. if you use contour the is a actual option for tabs in the operation tree.
if the models for the kinematics were mad in inch and you want them to be in Metric. open them up and scale them by 25.4.
They are Italic or are not flat to the plane you are working in?
Are you running the release version of Mastercam 2021. you may need to do an update as Mastercam may have been released before the SW 2021 version so the support was not there.
I cannot remember how...
I would start looking at the Machine Application Guide. We include this to help with things like this for the pacific Machine control file.Now I am including a screen shot from a Integrex i-300 1000U...
Are you saying to make Sheet solid extensions or do you mean Surfaces as extension run off surfaces?
This will help look for what Rick is trying to point you towards. But if you picked one of the Generic 4th machine defs then this what you would see. this is the Generic Haas 4th Machine def for...
https://www.cnczone.com/forums/attachment.php?attachmentid=477734&stc=1
This should give you what you want. if you lower the depth cuts you get more.
Look at using RollDie option in the Chooks. or application based on what version you are running.
what toolpath are you trying to using to cut this? now the WCS for the 4th is the machine WCS for this 4th? if you are doing a multiaxis toolpath output as a 4th or say multiaxis rotary, I would...
Jimmy, this really hard to see what you asking as a blend. can you send me your file? Also long time know see hear. hope you are well.
So you have a red USB key to plug in? That would be a Network Hasp. not sure were the conversation of V8 came from as you said and posted a picture of X8.
There is a Post basics class on the Mastercam University you may want to look into.
https://university.mastercam.com/
Ya this whole Covid thing has just been a night mare for sure. my house hold has been good. No issues so fare keep fingers crossed. MC 5.5 so if I remember correctly that was1995. If I remember...
Hey Superman my old friend you are correct it's old not 20 but note to far off. lol I have a customer that happens to be my old boss from the 90"s I am doing a project for. I remember I tried to get...
Well thank you for your opinion and 8 years later and on a version that was easily over 15 years . But I have made good pockets in Mastercam sense the 80's with not much fight at all. Now there are...
Well this conversation continues to go forward. I am not worried about my methods of teaching or doing. I continue to help other's grow in there careers that make me feel good.
If I can help I...
Really. so the next guy posts the way I do it. (if using common sense a guy travels the z below the block then raises it until the block can slide under the cutter . This will prevent damage to the...
What you don't use paper. like I used to do in the early days and seen many do lol but you are correct if you don't have a Probe or a gauge setter then the best is to use a block I fully agree. this...
Mac, how things should be a normal is really your opinion for if they come from the top or bottom. I find shops that come from the bottom all over the place and states. some start that way and some...
Print FX not know what version we are talking about. there is youtube videos like from Eapprentice.net showing how to add the option for adjusting the machine def to support angle heads to the X...
I suggest you get with your Reseller as there will be a little in-depth work on the post and multiaxis.
If you want to share your file I can convert it.
2022 is out and really stable.
Reach out to your reseller they should give you one at no cost. Also you are asking for a Post and not defining what version?
I would be interested in what type of work you do. the improvements that been added sense X3 have really made my work and ease of use better every time a new version comes out.But I program all kinds...
Bill at Northwood stopped support many years ago. so really good luck finding anything.
So you know if you are talking for the Mill Turn Product they are not your standard posts and Machine and control. they are a Single Machine environment. but both options are going to be locked to...
There are many changes in the default 5x post to make work with the table table setup of the UMC 750.