I statered pushing buttons by mistake back in 1990 on cnc lathes, I did like it so I started reading books to learn how to set up the machines, then I attended Fullerton College in California to be a...
Type: Posts; User: jpinzan
I statered pushing buttons by mistake back in 1990 on cnc lathes, I did like it so I started reading books to learn how to set up the machines, then I attended Fullerton College in California to be a...
Do you have mastercam V9? you can find a post right there.(mplosp7c.pst_v9 )All okuma lathes use the same post I program for four diferent controls and I use the same post. if you need help edeting...
I ran your program in simulation and I did not get any alarms. I think your machine supports LAP cycles because if it does not you will get alarm 512= LAP no spec. and no other alarms. you are...
one of my programs
N1 G0X20Z20
N2 G50S2500
(TAILSTOCK MOVES FORWARD)
N3 M157
N4 M56
N5 G04F2.0
N6 M1
N7 G97 T0303 S655 M3 M8
Good morning
I changed it to: G85 NAT1D.1F.01U.02W.003
NAT1 G81
try this
G85 NAT01 D.1F.01U.02W.003
NAT01 G81
you need to have spaces and you need 4 caracters after N
I would like to make a suggestion for your program. I do not know thE material that you are cutting but I cut inconnel on okumas and my depth of cut it's .200 so you should change your D.1 to D.2....
For milling I use Iscar and the garde is IC908. it works fine for me. for turning i have to send you the information later because I have the inserts at work and I don't remember tha grade
Try this book:
CNC Programming Handbook, Third Edition by Peter Smid (Hardcover - Nov 26, 2007)
is good. lots of information, cd, examples.
Your reseller can give yuo one for free I got mine for free from them.
You should get the machine. I work for a company and we have several lathes, fanuc controls, mazatrol controls and the ones that I love Okuma lathes. We got from very old Okumas Lb12, LR15 and...