Search:

We are considering the purchase of a VF2TR, but modified from the standard configuration listed on the HAAS website. The largest entry into our R&D fabrication shop is limited and for this reason I...

We are also considering the VF2TR, but modified from the standard configuration listed on the HAAS website.

The largest entry into our R&D fabrication shop is limited and for this reason I am...

http://www.sherline.com/emc/ini.html
The location of the files is stated in the above link.

emc emc2 configuration wizard - YouTube

http://farm7.static.flickr.com/6184/6107747406_8ca3c1df3f.jpg
20110902_003.jpg by RS274D, on Flickr

Give us your swarf, your stringy tails of metal debris, your huddled masses of crunchy metal chips -

http://farm1.static.flickr.com/88/244390681_8f0c69c8f7.jpg

I collect the chips I produce as...

http://www.richieburnett.co.uk/indheat.html

NJIT: A 'shell' might also be refered to as a terminal window, its a command prompt interface like the one you see in DOS.

If you are running Ubuntu you can open a terminal with the menu at the...

NJIT: If you have figured out how to access your BIOS you are very close. There should be a boot sequence somewhere in the BIOS menus. Methods for navigating through BIOS menus and changing...

yes you can download 6.06 from the ubuntu website.

http://releases.ubuntu.com/6.06/

The alternate install cd can install in text mode and has other unique features - so if your already decided...

What CD burning software did you use to burn your iso image? Did you burn the ISO file as data? Have you ever burned an iso image before? I only ask because I was very confused by the whole...

Yeah - i've seen this page and my favorite part of it without any doubt is the rant about art and robotics.



It's funny as all get-out!

If you want a slip free - no jiggle - vice, get a toolmakers vice(AKA diemakers' vice). I knew a tool maker with a mighty vice once - he wobbled a bit when practicing his vice a bit to much.
...

I've heard this story - with the exception that in the version I read the bit came back with a drilled and tapped hole in it! - and with a corresponding screw! I think this story is in one of the...

Is the Rong Fu column mill-drill the same as the one ENCO sells ?
This one: http://www.use-enco.com/CGI/INSRIT?PMAKA=325-5184

Or is it the same as the one here: http://ajaxcnc.com/DM45.htm ?
...

I use these for engraving.

http://www.micro100.com/inch/rtc_two_end.html

I am so jealous -

Why do you make them in separate blocks? Especialy the last piece? Is there a limit to the size you can pour? How many times can you use the graphite mold?

We have some...

Like this?

http://www.homecnc.info/Pics/powerbox-front800.jpg

http://www.homecnc.info/servomotor.htm

Do a search on CNCZONE for "controler schematic" -

I run a Bridgeport Discovery 308, and occassionaly I have gotten support from these folks. We upgraded are motherboard and got LAN capabilities recently. Good people.
...

I got this on amazon for 90$... is it the same one your looking at? It does only come with a 1/4" collet - but adapters can be easly fabricated for a smaller shank. I just finished making an...

Did anyone see the Machine Design article about the robotic roller-coaster?

http://www.machinedesign.com/ASP/viewSelectedArticle.asp?strArticleId=59957&strSite=MDSite
...

What is it?

It looks like something you would use to clamp on a cylinder/tube...

How big is this part? What is it made out of? Is it half of an assembly? Is the concave surface defined by...

Fritz

Don't apologize! Your contribution is greatly appreciated! I didn't mean to say anything to undermine your suggestion of cam.py being a good freeware CAM package. I don't know why you are...

Ghosting it up again!

I vaguely remember having to figure this out myself when I was playing with cam.py - It sounds like something you would run into when doing an include in a C program. Maybe I can recall what I did...

-
I's and J's are the center point of an arc. So when you say that it is cutting a circle, i figure it's supposed to do this. Arc commands(G02 and G03) are stated in either incremental mode or...

When ever I'm looking for a book I go first to ABE and then to AMAZON.
ABE:
http://www.abebooks.com
AMAZON:
http://www.amazon.com

http://static.flickr.com/29/101423044_69beb643eb.jpg

I had looked at this a while ago and decided that it wasn't a good fit for my needs. I like that it is free, and I think the fablab people...

I used three tools...

tool 1. 1/2" Dia 2flute for the initial outline and first rough
tool 2. 1/4" Dia 2flute for a secondary roughing path
tool 3. 1/8" Dia 4flute ball endmill to finish/engrave...

http://static.flickr.com/24/92436949_c38ec3ac8a_m.jpg
http://static.flickr.com/27/92436413_98d8e7cfa0_m.jpg
http://static.flickr.com/12/92436408_6d4d782c17_m.jpg
:cool: