how many Bearings?
Type: Posts; User: gotis
how many Bearings?
Sorry no mail recieved, can you please PM instead?
I´m milling 99% Aluminium and around 2000-5000rpm, thats why I´m looking for high speeds, but if the torque is lower on the 10000 in that range than the 6000 I´ll go with that one.
I´m using a...
Been trying to reach them a number of times but, nothing.
New Screen
Hey Panda!
I need a new motor for my mill I have e-mailed you.
I´ve sent 4 Emails but no reply, anyone know what´s up?
I´d like a shipping quote on a set of spindle bldc motor.
Yes it does, and how long is it? (total)
Hello,
Excellent build, could you please tell me the specs on that motor?
Looking for a replacement to my treadmill motor that´s toasting the brushes.
If i´m not misstaken, this is the correct order.
cleaning
anodizing
rinse cold water
colour
boil in water för 20-30minutes (closes the pores around colour)
rinse
done
Or something like this?
http://www.cnczone.com/forums/showthread.php?t=93947
problem solved.
fixed link,
thanks, shev
new problem.
trying to probe tooldiameter, all works well as long as i´m not using any work offsets, can´t probe in Y with machinecoordinates active.
any suggestions??
...
new problem.
trying to probe tooldiameter, all works well as long as i´m not using any work offsets, can´t probe with machinecoordinates active.
any suggestions???
...
I actually did!
But sold it on Tradera before it was completed.
Driven by a partner chainsaw motor, about 1,3meters long and 40cm wide.
about 50kg heavy.
Would sure like to get in touch with...
This is how I hooked it up before, according to KB.
Ok, got a new C6 speed controller and want to avoid any blue smoke.
Got a separate 12v supply, (old one got toasted)
Can´t find out if the pot is supposed to be removed, anyone know?
I think the...
still working.
here´s a fuzzy cellphone clip
8x2mm no idea what the feeds or speeds where.
http://s277.photobucket.com/albums/kk74/gotis1/?action=view¤t=DSC00173.flv
As you say you can´t make it worse.
The bearings should not be damaged IF they haven´t rusted to the spindlecartridge, in that case they are shot anyway, they should be a slidefit not pressfit, if...
Your work envelope is restricted
Or you could probably use berger lahr drivers.
http://www.schneider-electric-motion.com/index.php?scriptlet=CMS/Content&id=101&language=de
can be found on ebay sometimes.
Ok, made a boo boo, got the polarity of the touchscreen mixed up.
Anyone have a suspicion of what burned? is it worth the hassle of trying to get it repaired?
opened it up but nothing stands...
OK, No the only computer is the one controlling Mach, the pendant only houses the touchscreen, MPG, emergencystop, and the killswitch, connected to the LPT.
I don´t know what brand it is but i got...
Found why my MPG wouldn´t work.:banana:
I used the USB for the touchscreen to feed the MPG with 5v.
And the USB ground is NOT the same as LPT ground.
Just connected the two grounds together...
Checked it, but nothing, might have a faulty encoder.
Some progress since last post, are tramming at the moment, got axis Y within .007 mm, don´t ask how I was surprised as well
hmm, having diffiiculties hooking up the mpg. have connected as follows.
Lpt pin 11 to channel A
Lpt pin 10 to channel B
and 5v + and - to the mpg.
mach is setup as it should, what am I...
no disrespect, but you should really consider taking a nightclass in welding.
other than that, really nice project, will be monitoring your progress.
How do I accomplish ramped lead in in Z?
Pendant finnished!