Hi hope someone can help I have a anilam 5000 controller
the video display is starting to play up the screen changes
colour and also no video display has appeared a couple of times
is problem...
Type: Posts; User: barnesy
Hi hope someone can help I have a anilam 5000 controller
the video display is starting to play up the screen changes
colour and also no video display has appeared a couple of times
is problem...
hope I am in the right spot I have a mill with a anilam controller which uses a floppy disc drive for loading new programs I am wondering if a usb port my be fitted in its place
thank you I have changed the x in home limits and it worked
When I do a G1 x10 the m/c will move to the left and the readout will display x10.What is required is for the readout to display x-10 when you move to the left when you do G1 x-10
Yes y movements are away from you and this is displayed as a + movement as required
by moving to the right I mean When you stand in front of the machine it moves to the right.there is a camera mounted on liner rail which is what is moving.
I only want to change the display not the actual direction of movement
Hi
we have a machine running mach 3 mill it is used for checking postions on a print at the moment when you move to the right it displays a -movement in x we need it to display a + movement this...
hi guys
I am trying to set up a cordinate table running mach 3 but am have trouble getting the same movement all the time eg set to move 100mm and it will move 99.75 the first time next time it will...
I am milling a slot 5 mm deep,yes I have flood coolant,m/c is short for maching,350m/mm should be 350mm/m
I am trying to m/c s/s 304 with a 4mm solid carbide slot drill .5mm deep full dia. of cutter but keep on chipping the corners using approx. 3000 rpm 350m/mm feedrate what can I do to improve this...
I forgot to say the mat. is s/s304 and .186 thick
I have to m/c appox. 50 small slots with a .010 taper on the sides the slots are only .065 to .085 wide and .250 long. Any ideas on the best way to m/c these .We have thougth of may be sparking or...
I would check to see if it has a auto oil feeder as this makes a high pitched whine when the oil level is low
I think your best bet is with a manual press. you will need a stroke length of about 300mm. you have to bore hole first to put the guide for broach in.In uhmw it should take you only about 2 mins, a...
Have finnished m/c pocket it worked out fairly good and I was very happy with the end result (so was the boss ).I ended up taking full depth cuts of .2at about 750 rpm and a feed of 350mm ran the...
I only have 2mm left all round the pocket the size of the pocket is 666x209
the cutter has 4 flutes
I am trying to mill a pocket with a wall depth of 67 mm in alum. with a 20 mm hss long series end mill .THe tool is getting a fair amount of chatter ,which would be better climb milling or normal and...
glad to see that he will be missed in the states as much as here in aus.
Today my boss asked me to quote how long it would take to M/C a 3 mm pitch acme thread 16mm dia. 500mm long in s/s on a manual m/c I said I did not even want to think about it What would be your best...
we have just purchased a machine with a 5300 controller on it .Am finding it fairly easy to use so far,have not used all features yet,but love what I have used so far eg 3 lines of code to program...
nearly done drilling & reaming holes so far I have drilled and reamed over 3500 holes today it took 7 hrs to just ream the holes 1700 rpm 120 mm/m just need to shift plate and finish drilling and...
Thanks for the suggestions
The customer demands that I ream the holes The reamer that I have got is brand new
and I have been told it will be good for 50,000 holes luckly I only have one plate to...
I have to drill & ream 5000 3mm holes in 6061 alum. plate 10 mm thick.Any suggestions on speed & feeds for the drill & reamer would be a great help .
max rpm is 6000. holes are all the way through...
we have just purchased a king rich knee type mill with a anilam 5300 controller on it with only about 8 hour of training so far we have been up and running fairly well.
why are you trying to turn these what about grinding them
they are actualy ann-way tools
I have just brought some tool holders for our new n/c mill .they are ann-may brand has any one had them or used them
Hi
ITs not as big as some that has been listed but I worked on a large lathe that was 60ft between centers the chuck was about 14ft dia we machined steam turbines on it You sat up on the tool post.
Hi
Lots of cars here run on LPG with no great danger .The price per litre is about 55cents
(AUD) Regular petrol is around $1.40 (AUD) OR 98%octane at $1.53