Thanks for your reply, correct answer wasted loads of time sorting that out! you would think Fagor UK would have known
that
Type: Posts; User: blakey235
Thanks for your reply, correct answer wasted loads of time sorting that out! you would think Fagor UK would have known
that
I have an A & T power drawbar on my Rambo 5V air motor has stopped reversing, can't pull tools into spindle, any suggestions as to reason
Hi All my Ajax Premier + Fagor 800T refuse to talk to WinDNC been working OK for 6 months or more, will not show CNC files in WinDnc says (EXPLORER GETTING CNC DIRECTORY (transmission error)) cable...
Does anyone know how to clear protected memory message when uploading program on Fagor 800T
Error 34 I have discovered is caused by an extra control character at the end of the file listing, move cursor to the end and backspace over it, save and re-send 99996 lovely message SENT instead of...
I have EMCO PCMILL 155 after switching on and loading WINNC32 message comes up BOOT ERROR 0010
Invalid settings for USB interface, anybody come across this error message, or where to find USB...
Hi I need to now how to set tool change position on Anilam 1200 T lathe, goes back to reference point to tool change at present
1.5 metres ever time
You may get electrical drawing copies from TPH machine tools in UK e-mail [email protected] they sell RAMBO machine tools
Does anyone know what this error message means "" Illegal address 'T' "" or does anyone have a list of Anilam messages and their meanings.
Hi tpodgwaite, I have a Semco turret mill with 1100m working great problem is when i upload program to control, and use draw to run the program i get the message (Illegal address 'T') there is no...
I have Anilam engineers e-mail in UK if you need it
I have same problem, engineer linked all connectors on board with LED for limits 6 in row on left side, still get message I have to press clear 3 times, says servo delay please wait then drives come...
Does anyone out there know what causes error 34: Strange Character, Fagor Automation give me wishy washy reasons,
sent them program they say its OK. must be a better set of reasons for cause of...
Anybody know how to remove spaces in program, with Code Wizard in Edgecam 12.5, or any other way with an editor
The cable you are using does not work, have tried it
If you open the door to access drive cards switch on with pliers (insulated just in case!) on the left are X and Z axis drive cards the larger one is Z there should be a
green LED on each card if...
Hi anyone out there have an Edgecam V12.5 post processor for FAGOR 800T on AJAX Premier 165
You have to get machine to reference first, what error message appears when you try to reference machine
I have an Ajax premier lathe with 800T, the lathe works! problem the machine does not reference as all my previous lathes ie up to reference trip in Z (tailstock) and out to max Dia X on cross slide....
have you got Edgecam 12.5 post for Fagor 800T on AJAX premier lathe
I need Postprocessor for Fagor 800T 0n AJAX premier teach in lathe, can't get machine to go to logical point after setting X0 Z0 and entering T01 offsets
can somebody tell me how to create (true type) text on an arc or circle in solid modeller 12.5, also does any body out there have a post processor for the Anilam M/L control for a Harrison M250 or...
Hi There,
I am drowning on my first session on this site, can you tell me how
to post a thread introducing myself, to everyone saying hello to the community, the post a thread icon...