Devon U.K.
Type: Posts; User: Teajunkie
It doesnt have to be 90degrees its just a box for the example ;)
MDF 20mm is also a rough guess i dont buy it so i doint know the sizes available so 18mm or 25mm is fine.
Also I can't edit my...
If this makes sense??
An MDF base 340x250x20.
The red outline needs to be exactly A4 size and roughly 1mm deep to mark the outline of an A4 sheet so i can align the printed A4 sheet with the...
I don’t but I can make something up later. ;)
Good evening cnc zone long time no see.
I have a massive amount of keyrings I need to print but I have to make them one at a time so I need a pressing jig made up if possible?
The jig will...
Ok thanks for the help I think I'll go with the old dedicated pc build.
:cheers:
The problem I have now though my pic doesn't have space for a lpt board.
Hey guys and girls.
Been a member here fora bit now but not used my cnc for a long time as my pc died and the replacement doesn't have a parallel port.
The problem is my Chinese 3040 cnc only has...
I want to cut some 3mm acrylic but don't have any 0 flute bits to cut it with.
i have tried with various bits but it always comes out rough.
all I can find on eBay is 2 flute endmills and even...
Brilliant news thank you :banana:
I don't have a touch probe connection on the outside of the box so I opened it up to see if there are points on the pcb.
This is what I have inside the box....
263356 263358
i can clearly...
That's excellent thanks will have a look in the morning as it's 00:32 here lol (Yawn)
Can I ask what bits you are using to cut the mirror?
I only had three bits with my machine and all three are the same as this...
http://thumbs4.ebaystatic.com/d/l225/m/m7dSJd8m6Pc-7BEYv8oPTig.jpg
Thanks buddy that's great. :)
Post some pics of what u make.
I haven't managed anything yet other than the demo gcode lol
I want to start engraving dog tags made of aluminium but don't know what bits to purchase for the engraving the aluminium.
Does anyone have a guide to the different bits and what they are for?
Thanks buddy they didn't work either.
After a few hours of faffing about I wiped the hdd and installed xp pro sp2 and bingo first boot of Mach 3 it worked like a charm.
Thanks for your help
@minicncuser What settings are you using in your mach3
I have tried lots of different settings found on google and forums to no avail.
I have emailed the seller with a video of the problem...
This is the same guide as the one sent to me with the machine.
So these are the settings I followed.
http://www.cnc-club.ru/forum/download/file.php?id=26878
My first cnc machine so please be gentle.
my issue is none of the axis will move even though they move freely with the machine off and they are harder to move when powered on.
i have installed...
Hi to everyone who reads this.
I'm Paul 37 soon to be 38 looking for a hobby to pass my time so my wife bought me a little cnc machine ( 3020t-dj )
Was hoping to be up and running but it's not as...