Search:

Hi

I have some problem with the toolmagazine.

Sometimes it starts to rotate when I run the machine.
When it happens it rotates and then the machine stops and an error message appears:...

If you have a video about Moldplus I’m very interested about that..

Regards/
Kotten1 Sweden

Here is a small program to my machine.

After block N210 G0 Y100 M5.
Should it be like this? N220 G52 X0 Y0 Z0 M30

%PM
N9001
N10G18
N20G51
N30G54

Hi.
We have this machine at my work.
I working at SNA-europe
Snap-on in USA owns us.

If I run the machine in G0 X0 Y0 Z0 M30, it would be the same point that I have in G53?

I would like to...

Hi.

We have an old Maho MH 800E with CNC 432 Phillips.

Now to the problem.

Howe do I run the machine to machine zero point? (What is the G-code for it?)
I wont to have that G-codes at the...

Hi

How are you run the machine in jog-mode after that you have push emergency button?

Regards/
Kotten1, Sweden

Hi

We have an IBAG spindle in our machine, and you always have to have a tool in the spindle then you run it.

So now we always have a toll in the spindle then we turn off the machine.

...

Hi

How do you do when you start the machine without any tool in the spindle?
I get the messages E160, E180 then I try to start it.
(Maho 800E whit Philips 432)

/Regards
Kotten1, Sweden

Hello

How do you erase numbers and signs that you have typed in?
For example if you have entered a M-code that was wrong, how do you delete it?

Here are the settings from the Machineparameters:

DP0 = 16
DP1 = 16
DP2 = 0
DP3 = 0
DP4 = 0
DP5 = 0
DP6 = 0
DP7 = 2

Hi

Where are I fined the parameters in the machine?
Parameters that I find it’s like that.
T01=1
T02=2
T03=5
T04=10
T05=20
T06=50

Hi!
Maybe it’s a stupid question, but for me how don’t now it is a little bit difficult.
So how are you doing then you set zero point in regular way to G52 or maybe it’s G53?

Regards/
Kotten1

Yes it was maybe a stupid question.
I have find it out now .

When I’m in iso mode I just have to turn of the F2 button, otherwise I can’t
Program a new program in the machine..

Hi!
When you set M2 in EIA / ISO mode you hold memory button (or maybe it be called run)
And F2 button in.
But how are you doing when you want to set the machine back to MAZATROL mode?

Regards...

Hello

Does anyone know what G28 means, in use with Mazak machines??

:rainfro:

Help!
Does any one now how you set zero offset to G54?

Regards/
Kotten1

I don’t really now what you mean.

Then the machine is standing in my zero point. (That position I want to have my zero point on the material) I want to set the machine numbers in G54.
Do I have...

Is it any one now how to run whit drip feed?
How are you doing then you set the machine in drip feed position?

Kotten1/
Sweden

Thank you very much!
It’s work now.
(On my machine is ID Dir F5 button)

Hi,

I send the G-codes to the machine with Mastercam and it works, but I don’t now how to run the program in automatic position.
Then I’m in automatic or single position I can’t see any program.

Hi!

I also have a machine whit Philips 432 controller.

Now finally the machine is starting too talk to me.
I can transfer the program between the machine and PC.

But I don’t now how too...

You have too push button F2 and run or maybe it be called memory (it’s arrows on it) at the same time too set the machine in iso position.

Hi
Does any one have a constant list for Philips 432 version 6 or 7?
I have too change one of the constant because then I press X- the machine will run in X+.
I don’t now which constant it is for...

Yes!
I can drip feeding wiht that cable.

What’s the different between Software Handshaking and Hardware Handshaking cable?

Kotten1
Sweden

Can you run the machine whit drip feed?

Hi.
Now I have look in a cabinet.

For Mazatrol-file I use board FX27 and position J2.
For ISO-file I use board FX17 and position CNI2.

I don’t think that we have any converter between board...

I have a Mazak VQC-20/40B with Mazatrol M2.
I can transfer the program whit PcMaz for Mazatrol file and Cimco for iso file.

The cable I have is like this.

PC 9 pin, MC 25 pin
2 to 2
3 to 3...

I now that you can replace it.
It would be the easy way.
I think it a little bit of challenges to sharpen it of your own.

I would like to have a drawing on it, and then I just could do a...

Halo!
I have a blunt hand ice drill (see picture) as I would like too sharpen.
I think I maybe can mill it if I have a fixture to put it into.
Has any one experience about this?

Kotten1/
Sweden