Search:

SOLUTION WARE WORKS THE BEST YOU CREATE THE CAD AND CAN POST
IN MANY MACHINE CODES JUST G CODE OR TO THREE OR FOUR MAZATROL
MACHINES.YOU CAN DO IT IN G CODE AND PRESS MAKE MAZATROL AND IT IS DONE...

ON THE Z IF YOU TOUCH ON THE FACE MAKE Z THERE ON THE X SKIM THE BORE WITH YOUR BORING TOOL HIT X MEASURE AND ADD THE ACTUAL DIA
THAT YOU SKIMED THATS IT.

CHUCK OPEN MO6
CHUCK CLOSED M07

ON THE 640T OPEN UP FRONT PANEL AND YOU CAN PLUG IN A STANDARD KEYBOARD
ON THE MATRIX THE KEYBOARD NEEDS USB PLUG

GOO XO.OO YO.OO ( LOCATION )
Z.3 R PLANE TO MAVE HOLE TO HOLE
G83 X0.00 Y0.00 Z-00 Q.25 F5. R.1 ( RAPID .1 ABOVE WORK)
G00Z1.
G80
G28Z2. ( WITH ABSOULTE INCODER) OR G91G28Z0.
G49

NOT ALL MAZAKS ARE EIA =G CODE CAPABLE THERE IS A DISC TO
BE LOADED I HAVE IT FOR THE 640T CONTROL ON THE NEWER
MAZAKS IT IS NOT JUST PARM SETTINGS YOU NEED THE SOFTWARE
GOOD LUCK

SEND ME YOUR E-MAIL OR FAX NUMBER I HAVE THEM FROM A 1989 OM CONTROL
[email protected]

I DONT KNOW WHAT TYPE OF CONTROL THAT YOU ARE USING BUT ALL G CODE CONTROLS I HAVE G90 AND ALSO G91 ARE MODEL I HAVE AN OLD
FANUC 10M ON A MORI SEKI THAT I HAVE TO G91 G28Z0 BECAUSE IT DOES NOT HAVE...

DO THEY LOAD TO THE MACHINE AND WONT RUN OR NOT LOAD AT ALL

ON THE O CONTROL PARM# 128 IS YOUR CURRENT TOOL IF YOU SHOW WRONG TOOL GO TO THIS PAR AND CHANGE TO THE TOOL THAT IS IN POSITION.MAKE SURE YOU TURN PWE TO ONE TO CHANGE AND BACK TO O
WHEN YOU ARE...

G00 X6.375 Y-2.750
Z.1
G01Z-.765F25.
X6.735F8.
G02X6.735Y-2.750 I-.360 J0.
G00Z1.M09

G00 X6.375 Y-2.750
Z.1
G01Z-.76F25.
X6.735 F8.
G02X6.735Y-2.750 I-.360 J0.
G00Z1.M09

We Have The Same Machine And Control You Are On A Hard Limit
You Can Try This.
1- Power Down And Then Back Up Holding - And . When Powering Up
2- Press 4
3 N
4-6
This Lets You Power Up Even...