Hello! I've noticed our cutting fluid doing weird stuff like bad oily smell and coloring everything in dark yellow almost brown from several weeks. We changed the fluid this year to Mobilcut 250-new,...
Type: Posts; User: Tarox
Hello! I've noticed our cutting fluid doing weird stuff like bad oily smell and coloring everything in dark yellow almost brown from several weeks. We changed the fluid this year to Mobilcut 250-new,...
Hello! I have a nasty part that breaks my RGH OD tool very often so i set up the load monitor to tell me when it is broken. Could i declare the base, first and second limits before VLMON is ON for...
I've never been in a fixed room temp so i'm constantly changing the tool offset correction but i can deliver parts with +-0.01 without a problem. 2 days since i'm in constant mode 25C....no...
Yeah my paycheck is very low so i push whatever i can to learn new stuff and go to the next level :cool: Of course i'm not like Diddy from Dexter's Laboratory pushing blindly. What happened? I...
This diagram shows that i'll be within range if i set it to 25C and room temp is +-10C. Any thoughts?
424573
Ok so in the PDF they state that the ambient temp and oil temp should not have high difference...since the machine room temp is 15C in the morning and 30C after 5 hours...i'm gonna set it to...
Its on the bottom of this page
General Catalog (19MB) https://www.kantoseiki.co.jp/en/products/oilmatic.html
Do i gain some precision by holding 25°C on the main spindle? What about my second...
Hello! I have Oil Matic MPSD-07-N-CE on my Okuma B200. I dont have any books or manuals for the oil matic and i cant find much on the internet. Found in PDF what MPSD stands for:
M is for...model ?...
Hello! I want to thank you all for the useful thread and answers! Its been 3 days since we were trying to fix the same issue. Every 20 degrees from 0 to 360 the RDIF is showing 0.02 difference (0˚ -...
Haha my bad...I ment work force. Would be nice to be power ranger though...OK I will continue on email.
G00 z4 x48
G29 pz=25
G22 z-1 pz=20 g94 f50 d.5 l.2
G29 pz=20
G28
V1=vsioz
This is it. I don't know if I could do another test today. I need to do some boring work...after all I'm just a power...
If:
G29 pz=25
G22 pz=25........
G28
I get error "torque skip condition not satisfy" and the effort stays at 20%.
If I make it go deeper by Z, the effort stays at 20% and error shows (I don't...
Sorry I forgot to mention I'm with osp p200 and looks like there is no vszoz
If I replace the last line (g29) the effort stays at 20% until it reaches end point
The upper limit is 70%
I couldn't do it. The effort of Z rises to 20% only and shows error.
PS. I did it.
G29 pz=25
G22 pz=20...........
G29 pz=20
That is the way I recorded VAPAZ into V1. Now I need to figure out...
Then i am thanking mr Wizard for the help !
I can hardly compare to you in cnc skills...i got ALOT to learn.
Thanks man! I knew someone mention it in here but couldnt find it. What precision can i get from this ?
Hello! I have a little idea for one of our parts that will save me lots of work but I'm gonna need some help with the variables. Is there a way to set the part zero point automatically ? Like, I will...
Ok the tool is indexing when i change M axis to M242. I still have some hopes that the problem is software related:D but i will post when it gets fixed by the service guys.
Yes but i have to wait cause the guy is not in the country right now.
I realy dont know what to try except cleaning...
Thats what the service guy said. What problems can i expect in the future if it doesnt get fixed?
A month later (sorry) the service guy came. He couldn't figure out what the problem is. He thinks there is no sensor for M tool index and the M axis motor knows the position (or something like...
Hello world!
My okuma multus b200-w doesnt index early in the morning when i turn it on. TC=1 leads to non stop spinning the M axis. M602 and M603 leads to alarm "L-tool index command". The only...
Never mind i saw how to do it. The thread can be deleted.
Hello !
How can i measure both offsets for this tool (picture below) ? The tool number is 14 and when i measure it i type TL014014 but the other side of the tool is 014024 and i always have problems...
I would also like to see example with some variable as i have no idea how to use them. Thank you.
Thanks man it worked !! FIL was blinkling before the oil change. I pushed the button little harder this time and it cleared.
Okuma Multus B200-W
I was wondering if this 6 month oil change is...
Hello! We changed some oils today and i noticed blinking message on the cooling unit display " F IL." ? It is still blinking after the oil change. I cant find any documentation about that. Pushing...
I am doing the stuff you said now. Little bit late but never too late :idea: I had no idea what am i doing with this thread. The speed was around 700 so the feed rate was very high and i was lucky...
Thank you both! Looks like most of the tools dont have the right monitoring or dont have monitoring at all. I'm gonna fix that as soon as possible!
pff..i see my mistake now! Thank you very much! Will try it in a few hours. What's my advantage of using OkumaWiz's AUTOSET FIXR values ? Looks like alot of my programs didnt used the correct...