Seeing the code that you are sending to the machine might also be helpful. Maybe you are sending codes to bore holes instead of cutting a round profile?
Type: Posts; User: tocs
Seeing the code that you are sending to the machine might also be helpful. Maybe you are sending codes to bore holes instead of cutting a round profile?
I think I have things working. The C=1 is a code to offset the tool to the right of the cut line (C=2 is to offset to the left). The machine needs a little lead in G1 motion to define which is the...
For what it is worth, the trouble is with the C=1 line. C is the tool offset setting and 1 puts the tool on the right side of the cut. If I remove the line or set it to 0 the program loads and runs....
I have fairly recently started using a SCM Record 220 CNC and I would like to write a little python program to write an xxl file for a particular task here at this shop. I started by writing a script...
Well I have been down to the cabinet shop for most of a week and I still have not made any saw dust. At first I was thinking the programing would be problematic. That was maybe a mistake. There is...
I have a Zen Toolworks 7x7 CNC with a Gecko 540 driver. I am using LinuxCNC for and am happy with the set up.
Thanks for the reply. I am really looking forward to seeing the Record 220 go and I think every little bit of information is going to help.
I have noticed that going from dxf drawing to g-code is...
I have a Zen Toolworks 7x7 machine and run it using a Gecko 540 driver and EMC. It was all very easy to set up and I am very happy with the results. The machine is a little small but it has been a...
Basically, I have an opportunity to, possibly, move from using a very small (Zen Toolworks 6x6 inch hobby/ almost toy like) machine to a SCM Model Record 220 Routech (giant industrial machine) and I...