Search:

Thanks all I think i got it worked out in the G code. Not quite how i was hoping but it will do.

Is that easy to do?

Can anyone give me an idea how i program a fourth axis to run continuously in the back ground as my g code runs

I have a multicam water jet. Hope these are simular to the router control. I can not home the machine. the z is behind the switch. I need to drop the z before i can home. I think i need to get...

did you ever get this question answered. I am having the same thoughts just 7 years later,

That is too bad, hoping their is some one out there as I am really having a tough time getting over there.

I have older gent in Naniamo who has build a cnc plasma table. It will run CandCNC control and Mach3. I need some one that understands the control side and lives in Naniamo that would be interested...

I have older gent in Naniamo who has build a cnc plasma table. It will run CandCNC control and Mach3. I need some one that understands the control side and lives in Naniamo that would be interested...

I am selling my Hypertherm machine touch on ebay

Machine tourch for the hypertherm 1000 or 1200. It includes a lot of spare tips and nozzles and other miscellanious parts

This touch was working...

I have a NextEngine desktop 3D Scanner for sale. It is a couple of years old. I have actually only used it once. I am too busy with other things and not able to make use of it. Sadly, as it cost...

I have had the NextEngine 3D scanner for some time now. Odd though i have used only once. Just to busy with other things. As such it is for sale. Listed on ebay.
...

Got from Terry Parker

Here is the FIX,

sheetcam.com :: View topic - Stable version.010 bug

(;-) TP

This is an odd issue that I have seen a few years ago but i can not figure out how i had fixed or where it came from. I recently upgraded sheetcam but other than that i don't know where this is...

It now works - Post #3 and a pair of glasses and it will work quite nicely

Hi guys - I am having a bit of trouble with this. This is on my small mill drill and I am using a G540 with no luck. I have tried assigning an input to input 1, 4 and oem trigger 1 using code 1000...

Bought a larger and in the end a more applicable spindle

Thanks all I have partially solved this. I found my self play the cv settings on settings page in mach3. Changing cv feedrate and enabling / disabling cv while it was a running some test code and...

I am running artcam pro 2008 on a sony laptop with 4gb and vista altimate sp2, 64bit os and i am have an increasingly difficult time with the software locking up. Not being able to open files. Click...

I am having some trouble getting smooth motion out of my router. I am under the impression, i can not recall why, that cv does not work well with arcs. I actually have two systems. A plasma system...

Anyone have a good source for 3D clip Art. I have heard of few but I would like more choices, Thanks

Hi - I might be able to help. I am located on salt spring island BC. All the best - Ron

Thanks Tom I will have to check this tomorrow. In the mean time I got a reply from sheetcam suggesting I alter the way I am bringing drawings into sheetcam and as well as editing the post to...

Could anyone recommend a good hand control for Mach 3. USB preferred

I need my cv settings. They are necessary for the rest of the part. This code is only representive of a small parts of the cut that are problematic.l

I am using Mach 3 on my plasma table and I am cutting 8 inch character O in this case. I am using sheetcam tng. I have CV paramenters set and I am generally have with my set up. However the machine...

I would try to build you gantry with less than 34's

gecko drives are the best

the gecko 540 is great for the nema 23's

as far as canned packages go candcnc uses gecko drives and is cheap and...

Ted -how did you make out? DOes it work?

Still having trouble. I bought these endmill holders, the perfect solution but they dont fit the Perske spindle. Collet nut is 19mmX1.0 So the imperial end mill holder will not fit on this spindle....

Joe - do you think ikea cabinets could stand up in the work shop. I am thinking i would need a heavy counter top than normal. Buttom line i am trying to find a cheap and dirty solution for my work...

If you have no luck in calgary i may be able to help on saltspring island. Shipping may be a bit of an issue but not impossible
Ron