Search:

what motor are you running?

im potentially interested

thanks for the reply guys, i think i read it wrong where i thought that the ethernet smoothstepper works with linux cnc.

i was also wondering if the cnc lathe part of mach3 actuall works...

thanks, i was hoping for "real world" experience from people, from my research i havent been able to make up my mind between the two.

I was wondering if someone would be able to tell me the pros/cons of each i will be using this on a G0602 converion (and depending on the benefit i may swap out my g0704 C13 i think board) i am...

have any in mind? whats ur target max rpm?

i just picked up this motor for 50$ (sent offer), not sure if it interests u

WEG HP02PB56C 1 5 HP Motor New | eBay

me neither,

i am going to switch out the standoff/bolt situation. thinking of using threaded standoffs cut to size, i also went ahead and ordered some "oldham" coupling , to replace the lovejoy...

was poking around in mach/the internet and saw that some people where experiencing the same problem (had to do with the acceleration values as you have suggested), i will be going through it and also...

http://www.cnczone.com/forums/attachment.php?attachmentid=316850&stc=1http://www.cnczone.com/forums/attachment.php?attachmentid=316852&stc=1http://www.cnczone.com/forums/attachment.php?attachmentid=31...

slight update.

purchased new stepper motors, and just for laughs when i had the old ones disconnected from the ball screws i tried to see if i can get the machine to hang... when i first jog the...

do you guys thing this style stand/enclosure would work with a g0704? (I was told that the stand needs to be as heavy/rigid as possible)

thanks

my machine supposedly has roton ball screws. i will be taking it apart and taking pictures once i order/receive my new stepper motors, so far the only place ive been able to find 8mm shaft nema23 is...

Thanks for the response, i will be ordering replacement stepper motors as soon as i can find/figure out what i have (to replace the damaged ones), then checking everything once i replace them. I...

Hello,

I recently purchased a used g0704 mill that has a cnc conversion and have been experiencing some problems with it.

2 of my stepper motors are damaged (x and y mounting flange is...

any updates to this?

was thinking of ordering one of those 1100W bldc motors, looks small enough to maybe work

i would prefer something that would allow for a power draw bar option (later down the road)

bump, interested as well