Search:

Nope....

The issue has been resolved. They were "opening" the file- not " importing" the file.


All is good


B,

I have a simple Text that my buddy is trying to cut out and it is showing on his end - intersections/nodes on my end that say midpoint-6 to be exact.

The plasma cuts these out but stops at...

Screwdriver....hammer. ....I would not do that, rent a puller.
As far as the prongs.....usually that is a 4 prong on 3ph if I am not mistaken.

What you pay for a single phase motor , you...

Yea,
That looks like 3ph to me, but, you can get yourself a 110 to 220 VFD inverter to run that motor, fairly inexpensive,,,,

It still has possibilities IMO




B,

Well,
I've run her with the Yaskawa and have had no problems, other than heating up the L350. When I talked with the rep from Presision Zone , he went above the amp rating on the motor (13.5...

Tag says 220/380 ,......


You say he ran it off single phase 220, how is that possible ? I recently had an experience with this. My Oliver 88D from 1929 was originally manufactured as a 440vlt ...

Thanks for moving this Al,:wave:
The motor is old Al, from the late 40's and it does not say inverter duty anywhere. I have run this machine before with no issues but now that the filter is...

I have a Moak 32" band saw from 1949 with a Master Motor (3hp/3ph - 575rpm,13.7 amp) I am using a Yaskawa 19.5 amp output VFD to run the motor (230 single phase in) . I was concerned about the age of...

I talked with a distributor for the hardware/software needed and this is what the came up with, they where very helpful but I am not sure if I need all this software, or the cabinet :
1) Qty 1 -...

This is something that you can do with a band saw. cut out your pattern on some cardboard and place it on the stock- trace it and fallow the cut out line on the stock with your band saw- stop 3-4"...

Your exactly correct! :cheers: I do need the spindle to move slow as well as the carriage. However. Lets say , and I hope I am explaining this correctly, the column calls for a twist , it is 6' in...

Al,
Thank you for clearing that up for me. that helps. I always like to talk intellectually when trying to describe something and this helps me out tremendously. xyz-pdq- I didn't know where you...

:violin: Art,
That's a neat concept, and reminds me of the legacy ,however, that is not the direction I want to go. i definitely want to bring this Oliver out of the prehistoric age and up to...

Thanks for getting back to me. I don't think I made my statements very clear. The carriage has a wide verity of cutting tools and the router is not used for any of that process (rounding) the only...

Thank you for your help Al - I really appreciate your input! the headstock spindle and the travel on the carriage must be linked. My drive system is not 1ph it is a Baldore induction motor: 220V 3...

Al,
I want to do twist rope and maybe some other things - no metal threading.I do column work (large) column work I might add. 24" in diamiter and up to 105" long. I would like to be able to...

Do you need more photo's of the headstock ? I really need some help on this. I don't know where to start- honestly.. I am not comp illitereate but I do need to know what i have to have to make this...

Here is the lathe: Oliver 20C pattern lathe, I have totally refurbished this lathe from the ground up , including the drive system for the headstock (transmision is in the belly) any help would be...

I am in the midst of trying to figure out how to do this. I would like to have the headstock spindle (linked ) to the carriage on the bed. I was sent an E-mail from a member of another forum and had...