Here's what we did -
M19;
G10L50;
N4077P1Rxxxx;
G11;
M3 550;
G04 P1000;
M5;
M19;
Type: Posts; User: rubino2112
Here's what we did -
M19;
G10L50;
N4077P1Rxxxx;
G11;
M3 550;
G04 P1000;
M5;
M19;
We are trying to orient the spindle every 12 deg. for hole drilling (ID) and are having problems getting the spindle to orient to the new parameter location.
example:
m19;
g10 l50;
n4077 p1...
Go buy a few CNC machines and finance them, you'll learn real quick how to make money! When your back is against the wall on those payments you'll figure a way make 'em.
Does anyone know how to reset the matrix servo on a Quantum/Kasuga? The tool pot gets stuck and I am assuming that this will correct?
Yes, using M19; G10L50; N4077P1R (new value) G11; M19; from what I am told? - on a large machining center. The holes are blind and were only drilling 7/16 deep, inserting graphite plugs and then...
I am looking at purchasing an angle head (indexable) from www.eltool.com. and they say it can be indexed in the spindle by changing the parameters. We need to drill id holes for a brz bushing and...
Looking for information on inserting graphite plugs into bronze bearing material and machining it.
Al - Thank You for your reply. I dont have that section in my maintenance manual, is there another source for that info? possibly online?
Thanks again.
300 APC ALARM, A axis need zrn. 307 APC ALARM A axis battery down. I replaced the battery with a spare, not sure if it is a good battery. I can reset the 307 alarm, however, I cannot reset the 300...
Does any know of a good parts supplier other than the usual distributors