The top switches are the overtravel and are N.C,there triggered when the dynamics head goes over 8 degrees.
Don't know if you're aware but if you push in the lower green button on the side of the...
Type: Posts; User: adambrum
The top switches are the overtravel and are N.C,there triggered when the dynamics head goes over 8 degrees.
Don't know if you're aware but if you push in the lower green button on the side of the...
As the title says, I have a few different options available for a PC for mach3
1st I have an industrial PC with Windows XP embedded but it had no parallel port
2nd Old desktop which I can do a...
Im finally going to start designing and building my cnc router, I have a general design in my head and what i want the machine to do but im not so sure on the details.
The machine will have a...
Yep thats a 4th axis for taper compensation, not sure how far it goes over but i know on other machines its about 8 degrees for taper compensation or 60 degrees if you go 5-axis
If you had it cut with a waterjet there's no heat involved just make sure the machine has taper compensation. A good machine with a good operator should be able to get it 0.1mm or better.
I have looking a building myself a small cnc router mainly for acrylic but as its my first venture into diy cnc i have been looking at kits when i came across one on ebay.
The kit retails a...
Just a quick hello before i start asking for help.
only just started looking at building a cnc machine, hopfully my background should help. I used to be a toolmaker many years ago on CNC lathes...