Search:

I might as well though my hat into the ring and offer my installation services for people that want high speed machining. I have got the CamSoft system honed in to go faster and tighter than the...

we are in illinois. let us know how it comes out.

haven't done real probing myself but the camsoft folder has several probing routines for renishaw models and generic models given as analog or...

sounds like a nice machine and good project to get going.

I know about the old getty drives and fanuc and fagor controls. watch out with the inductosyn scales. you will need to buy a converter box...

By the way I think the softservo stuff stinks. I would rather trust the galil card to close the servo loop than their method plus I heard they have bugs issues and want to replace good working...

The 16M was on a machine I once used , not on the machine we used for the router.

Johnny

I ran a Fanuc 16m & Fagor on a wood router a while back. I don't carefor Fanuc that much and one of the reasons was that the programs we were given were long 3D splines which I could not run on the...

I haven't done 5 axis yet but I researched it quite a bit. I feel pretty confident now that Camsoft will do well. It works good for us so far. I looked in to the 5 axis files they have and played in...

Al,

If this was someone's first retrofit and they didn't know ladder or Camsoft I would still recommend they hire someone like us.

I chose Camsoft because it was much cheaper than fanuc and I...

Colin,

I agree that you should use an installer. I know what I am doing now and have done a few CamSoft installs. It is still easier than learning ladder logic plus I get better help from them...

hi guys

I will post a complete set of canned cycles my client made for his Fagor and another set from a Fanuc control he imulated using CNC Professional using v15. I know they have 16 now. I will...

hi guys,

I have been doing what keithorr said for years now. This is cool stuff. When I first started I used big speakers to blast out the number of parts, air pressure too low, door is opened,...

Last year we where cutting about 500 speaker holes a day. Circle after circle and it worked great on that job.

Long before that there was another situation were I had a small .0005 error but only...

For Colin and other Cam soft fans.

I too share everyones over all good things about Cam soft. I have looked hard and they are the over all best for a real machine shop like ours. It was scary at...

I found several prewritten EDM macro routines on my Camsoft CD. some are for sinker type EDM and others for wire EDM. there are sodick, japax and agie post too for their embedded CAD/CAM system.
...

Jevs,

I can't remember the web page where I saw it, but Camsoft does have a Hobby Shop system that adds back on many of the features that CNC Lite doesn't have. The systems price includes...

i am new here and i don't want to beat a dead horse but this g code thing i don't understand. i thought there was many different g code formats.

i also want to say i have been using camsoft for a...