If you go to ebay and search for PAD03 CO2 Laser Controller (assuming you have the PAD03) there's a couple on there from China. I think the one I bought years ago came with a new cable. I'd try the...
Type: Posts; User: SkipW
If you go to ebay and search for PAD03 CO2 Laser Controller (assuming you have the PAD03) there's a couple on there from China. I think the one I bought years ago came with a new cable. I'd try the...
Check out Quick CNC K6090D--Jinan Quick CNC Router Co., Ltd.
Several members here have purchased machines from Quick. As far as I know everyone is happy with them. I've had a K6100A for a couple...
Greetings, I occasionally cut 1/4" G-10 Micarta on my cnc using 3 flute 1/8" end mills with a TiCN coating, 16,000 rpm and only 6 IPM feed. I cut them dry and had to slow the feed to 6 IPM to get...
For future reference..
DPI = Scangap
1200 = 0.02116
800 = 0.03175
600 = 0.04233
500 = 0.05080
400 = 0.06350
300 = 0.0846
200 = 0.12700
Here's a video showing the copper wire test.
I don't know what you would have to change in the settings to correct this. I wish I did!
I would like to ask other LaserCut 5.3 users to make some vector text and do a bi-directional engrave...
Jacala, are you using LaserCut software? Is this what you are talking about?
You may not want to go to this extreme, but this is what I did to my K6100A.
Link with pics.
Set you scan gap to 0.170 and try that. That is roughly 150 DPI.
I picked up a Leetro MPC 6515 control board ( V4.1.2.3 ) and it came with a green dongle/softdog/hasp. Anyone know which version of LaserCut will work with this board?
Thanks
EDIT:
Never...
Beautiful relief files Peter, thank you!
Try this. It's converted with Corel Draw so I hope it opens okay for you.
Skip
Here's a video of it in action.
EEW-PROTEC GmbH: Videos
What a beast!
Goran, here is a good youtube video that shows the complete setup procedure and mirror alignment. Hope this helps.
CO2 Laser Machine Setup - YouTube
If you make changes to the machine settings in LaserCut, they won't take affect unless you re-download the config file to the laser. You should hear a beep after a successful download to the machine.
Here is the zipped 6515 manual. Chapter 8 describes the indicator lights and faults. Hope this helps you figure out your problem.
I have a 2HP spindle also. Mine came with a Lifetech AP4500 pump. A Google search says that they are rated at around 690 gal. per hour. That must be with bigger tubing than I'm using. That's the...
Create a new box Neat program to make cubes.
If you have CorelDraw you can import the PDF and export as DXF or other formats.
Hi Archi,
There's a forum dedicated to Chinese lasers here Laser Engraving & Cutting Machines - CNCzone.com-The Largest Machinist Community on the net! but I can tell you that I have a WK Laser...
I can't take credit for the RPM tip, KDRusty turned me on to that info before I had a chance to make my own speed plate. There's a VFD manual?
Hope your fault problem is a quick fix.
That was a good vid Chris. Liked the bloopers at the end too... lol
Did you know that if you push the Function/Data button 2 times, it will show you the RPM you are running? Well the first 3...
Here's a neat wolf/moon/feather ornament type thing.
Just a reminder for people in the US who are importing machines from China....
Make sure your broker submits this form to Customs and Border Patrol (CBP) before the machine is loaded on the ship....
I think maybe this is the plane you are looking for?
http://www.cnczone.com/forums/619753-post396.html
Here's another, inch size.
Tony,
Check all of your wire connections on the tube and power supply. I'm not sure of your setup, but I've had similar problems in the past that have been corrected by checking and re-tightening...
It could have been worse, he could have posted a link to pictures and info on another forum instead of here at cnczone. :)
Hi Ferry,
Where in LaserCut do you change from metric measurements to imperial?
Thanks,
Skip
In LaserCut you change the DPI by changing the "Scan Gap" setting when you select "Engrave". If you search this forum for "Scan Gap", there have been several charts posted that convert different DPI...
Here is a youtube video that shows you how to change the DSP language.
YouTube - ‪How to change language to English on DSP control panel‬‏
Hope it works for you.